https://doi.org/10.4081/jae.2020.1043
Shear strength of soil by using clam shell waste as recycle aggregate
Published: 29 September 2020
Abstract Views: 1157
PDF: 541
HTML: 53
HTML: 53
Publisher's note
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
Authors
Every year in Japan, industry and household consumption generate a significant amount of clam shell waste. It has inevitably imposed a negative impact on the national environment and economics. To reduce those effects, this study proposes the reutilisation of abandoned clam shell for ground improvement. An experimental study was conducted to evaluate the shear strength of this new construction material. Soils were mixed with various percentages of clam shells as well as cement. The new soil-clam shellcement samples were tested under the triaxial consolidateddrained tests (CD tests). Test results showed that the addition of clam shell and cement in the soil leads to increase deviatoric stress. Furthermore, shear strength parameters of specimens were quantified in terms of cohesion and frictional resistance. Based on the results of the current study, it was concluded that approximately 9.50% increase of frictional angle can be achieved whilst the cohesion can only be improved by 6%. This new construction material can be used in the future for the base course of unpaved roads in agriculture engineering applications.
Agustini TW, Fahmi AS, Widowati I, Sarwono A (2011) Utilization of Asian moon scallop (Amusium pleuronectes) shell waste on making of calcium-rich cookies (in Indonesian). Indonesian Fisheries Processing Journal. 1: 8-13.
Arora KR (1978) Soil Mechanics and Foundation Engineering. Nai Sarak-Delhi: Standard Publishers Distributors. Ch: 13
Consoli NC, Prietto PDM, Ulbrich LA (1998) Influence of fiber and cement addition on behavior of sandy soil. Journal Geotechnical Geoenvironmental. Eng. 124: 1211-1214.
Das BM (2007) Fundamentals of Geotechnical Engineering, Third Edition, United States: SI Cencage Learning, Ch: 3
Downey R, Marsh L, Flick GJF Jr. (2012) The seafood industry: species, products, processing and safety-2nd ed. Balckwell Publishing. Ltd. 76-77.
Hosain Md.Z, Narioka H, Sakai T. (2006). Effect of ordinary Portland-cement on properties of clayey soil in Mie Prefecture. J. Jpn. Soc. Soil. Phys. 103:31-38.
Hossain Md.Z, Sakai T (2008) The effectiveness of nominal dosage of ordinary cement on strength and permeability of clayey soil. J. Jpn. Soc. Soil Phys. 110:25-35.
Hossain MZ (2013) Waste shell husks concrete: durability, permeability and mechanical properties. J. of Building Construction and Planning Research. 1: 61-66.
DOI: https://doi.org/10.4236/jbcpr.2013.13009
JGS 0524 (2001) Method for consolidated-drained triaxial compression test on soils, Japan Geotechnical Society. Dositsu Shiken Hou, Dositsu Kogakkai (in Japanese). 233-243.
Li HY, Tan YQ, Zhang L, Zhang YX, Song YH, Ye Y, Xia MS (2012) Bio-filler from waste shellfish shell: preparation, characterization, and its effect on the mechanical properties on polypropylene composites. J. of Hazard Mater. 217-218: 256-262.
Motamedi S, Shamshirband S, Hashim R, Petkovic D, Roy C (2015) Estimating unconfined compressive strength of cockle shell-cement-sand mixtures using soft computing methodologies. Engineering Structures. 98: 49-58.
DOI: https://doi.org/10.1016/j.engstruct.2015.03.070
Mouazen A M, Ramon H, Baerdemaker JD (2002) Effects of bulk density and moisture content on selected mechanical properties of sandy loam soil. Biosystem Engineering. 83: 217-224.
Park K., Jun S, Kim D (2014) Effect of strength enhancement of soil treated with environment-friendly calcium carbonate powder. The Scientific World Journal. 2014: 1-11.
DOI: https://doi.org/10.1155/2014/526491
Rachmawati SH, Zakaria MZ (2017) Utilization of Utilization of waste shell husks for ground improvement. International Agricultural Engineering Journal. 26: 11-18.
Rachmawati SH, Hossain Z, Shiau J (2018) Agriculture land development using shell husk as recycle aggregate. Agricultural Engineering International: CIGR Journal. 20: 45-51.
Sariosseiri F, Muhunthan B (2009) Effect of cement treatment on geotechnical properties of some Washington State soils. Engineering Geology. 104: 119-125.
DOI: https://doi.org/10.1016/j.enggeo.2008.09.003
Vaughan (2001) Gladys arched collection on Family: Mactridae (surf or trough clams, Mactras). Washington State University. Accessed 10 February 2018.
Yoon G L, Yoon YW, Chae, KS (2009) Shear strength and compressibility of oyster shell-sand mixtures. J. Environ Earth Sci. 60: 1701-1709.
DOI: https://doi.org/10.1007/s12665-009-0304-1
Zhang CB, Chen LH, Liu YP, Ji XD, Liu XP (2010) Triaxial compression test of soil-root composites to evaluate influence of roots on soil shear-strength. Ecological Engineering. 36: 19-26.
DOI: https://doi.org/10.1016/j.ecoleng.2009.09.005
How to Cite
Rachmawati, S. H., Hossain, Z. and Shiau, J. (2020) “Shear strength of soil by using clam shell waste as recycle aggregate”, Journal of Agricultural Engineering, 51(3), pp. 155–160. doi: 10.4081/jae.2020.1043.
PAGEPress has chosen to apply the Creative Commons Attribution NonCommercial 4.0 International License (CC BY-NC 4.0) to all manuscripts to be published.
Similar Articles
- Francesco Da Borso, Alessandro Chiumenti, Maurizia Sigura, Andrea Pezzuolo, Influence of automatic feeding systems on design and management of dairy farms , Journal of Agricultural Engineering: Vol. 48 No. s1 (2017): Special Issue
- Wenjun Wang, Sihao Zhang, Jingyu Li, Pengfei Zhang, Yulong Chen, Effects of the twin-row planter with subsoiling on soybean growth and yield in northern China , Journal of Agricultural Engineering: Vol. 53 No. 3 (2022)
- Saddam Hussain, Decong Zheng , Haiyan Song, Muhammad Usman Farid, Abdul Ghafoor, Xinyi Ba, Hao Wang, Wenjun Wang, Alam Sher, Salah Jumaa Alshamali, Computational fluid dynamics simulation and optimisation of the threshing unit of buckwheat thresher for effective cleaning of the cleaning chamber , Journal of Agricultural Engineering: Vol. 53 No. 1 (2022)
- Francesco Bettella, Tamara Michelini, Vincenzo D'Agostino, Gian Battista Bischetti, The ability of tree stems to intercept debris flows in forested fan areas: A laboratory modelling study , Journal of Agricultural Engineering: Vol. 49 No. 1 (2018)
- Alessio Tugnolo, Roberto Beghi, Valentina Giovenzana, Alessia Pampuri, Simone Virginio Marai, Andrea Casson, Enrico Ferrari, Riccardo Guidetti, Testing of ultrasonic vibration to speed up the remuage operation in sparkling wine production , Journal of Agricultural Engineering: Vol. 55 No. 2 (2024)
- Ehsan Movahedi, Morteza Sadeghi, Amin Allah Masoumi, Naser Hamdami, A continuous high voltage electrostatic field system for thawing food materials , Journal of Agricultural Engineering: Vol. 52 No. 2 (2021)
- Frank Agyen Dwomoh, Xingye Zhu, Alexander Fordjour, Junping Liu, Shouqi Yuan, Hong Li, Structural design and performance characteristics of the fluidic sprinkler application technology for saving irrigation water: a review , Journal of Agricultural Engineering: Vol. 54 No. 2 (2023)
- Lorenzo Vergni, Alessandra Vinci, Francesca Todisco, Francesco Saverio Santaga, Marco Vizzari, Comparing Sentinel-1, Sentinel-2, and Landsat-8 data in the early recognition of irrigated areas in central Italy , Journal of Agricultural Engineering: Vol. 52 No. 4 (2021)
- Alessandro Toccolini, Simone Felisari, Paolo Stefano Ferrario, Design of green spaces located below the urbanised level. Themes, problems and solutions applied to a case study , Journal of Agricultural Engineering: Vol. 46 No. 4 (2015)
- Artur Altunyan, Arshaluys Tarverdyan, Geometric and kinematic parameters of vibrating knife in the development of cutting machines , Journal of Agricultural Engineering: Vol. 52 No. 3 (2021)
<< < 9 10 11 12 13 14 15 16 17 18 > >>
You may also start an advanced similarity search for this article.
