https://doi.org/10.4081/jae.2020.1043
Shear strength of soil by using clam shell waste as recycle aggregate
Published: 29 September 2020
Abstract Views: 1157
PDF: 541
HTML: 53
HTML: 53
Publisher's note
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
Authors
Every year in Japan, industry and household consumption generate a significant amount of clam shell waste. It has inevitably imposed a negative impact on the national environment and economics. To reduce those effects, this study proposes the reutilisation of abandoned clam shell for ground improvement. An experimental study was conducted to evaluate the shear strength of this new construction material. Soils were mixed with various percentages of clam shells as well as cement. The new soil-clam shellcement samples were tested under the triaxial consolidateddrained tests (CD tests). Test results showed that the addition of clam shell and cement in the soil leads to increase deviatoric stress. Furthermore, shear strength parameters of specimens were quantified in terms of cohesion and frictional resistance. Based on the results of the current study, it was concluded that approximately 9.50% increase of frictional angle can be achieved whilst the cohesion can only be improved by 6%. This new construction material can be used in the future for the base course of unpaved roads in agriculture engineering applications.
Agustini TW, Fahmi AS, Widowati I, Sarwono A (2011) Utilization of Asian moon scallop (Amusium pleuronectes) shell waste on making of calcium-rich cookies (in Indonesian). Indonesian Fisheries Processing Journal. 1: 8-13.
Arora KR (1978) Soil Mechanics and Foundation Engineering. Nai Sarak-Delhi: Standard Publishers Distributors. Ch: 13
Consoli NC, Prietto PDM, Ulbrich LA (1998) Influence of fiber and cement addition on behavior of sandy soil. Journal Geotechnical Geoenvironmental. Eng. 124: 1211-1214.
Das BM (2007) Fundamentals of Geotechnical Engineering, Third Edition, United States: SI Cencage Learning, Ch: 3
Downey R, Marsh L, Flick GJF Jr. (2012) The seafood industry: species, products, processing and safety-2nd ed. Balckwell Publishing. Ltd. 76-77.
Hosain Md.Z, Narioka H, Sakai T. (2006). Effect of ordinary Portland-cement on properties of clayey soil in Mie Prefecture. J. Jpn. Soc. Soil. Phys. 103:31-38.
Hossain Md.Z, Sakai T (2008) The effectiveness of nominal dosage of ordinary cement on strength and permeability of clayey soil. J. Jpn. Soc. Soil Phys. 110:25-35.
Hossain MZ (2013) Waste shell husks concrete: durability, permeability and mechanical properties. J. of Building Construction and Planning Research. 1: 61-66.
DOI: https://doi.org/10.4236/jbcpr.2013.13009
JGS 0524 (2001) Method for consolidated-drained triaxial compression test on soils, Japan Geotechnical Society. Dositsu Shiken Hou, Dositsu Kogakkai (in Japanese). 233-243.
Li HY, Tan YQ, Zhang L, Zhang YX, Song YH, Ye Y, Xia MS (2012) Bio-filler from waste shellfish shell: preparation, characterization, and its effect on the mechanical properties on polypropylene composites. J. of Hazard Mater. 217-218: 256-262.
Motamedi S, Shamshirband S, Hashim R, Petkovic D, Roy C (2015) Estimating unconfined compressive strength of cockle shell-cement-sand mixtures using soft computing methodologies. Engineering Structures. 98: 49-58.
DOI: https://doi.org/10.1016/j.engstruct.2015.03.070
Mouazen A M, Ramon H, Baerdemaker JD (2002) Effects of bulk density and moisture content on selected mechanical properties of sandy loam soil. Biosystem Engineering. 83: 217-224.
Park K., Jun S, Kim D (2014) Effect of strength enhancement of soil treated with environment-friendly calcium carbonate powder. The Scientific World Journal. 2014: 1-11.
DOI: https://doi.org/10.1155/2014/526491
Rachmawati SH, Zakaria MZ (2017) Utilization of Utilization of waste shell husks for ground improvement. International Agricultural Engineering Journal. 26: 11-18.
Rachmawati SH, Hossain Z, Shiau J (2018) Agriculture land development using shell husk as recycle aggregate. Agricultural Engineering International: CIGR Journal. 20: 45-51.
Sariosseiri F, Muhunthan B (2009) Effect of cement treatment on geotechnical properties of some Washington State soils. Engineering Geology. 104: 119-125.
DOI: https://doi.org/10.1016/j.enggeo.2008.09.003
Vaughan (2001) Gladys arched collection on Family: Mactridae (surf or trough clams, Mactras). Washington State University. Accessed 10 February 2018.
Yoon G L, Yoon YW, Chae, KS (2009) Shear strength and compressibility of oyster shell-sand mixtures. J. Environ Earth Sci. 60: 1701-1709.
DOI: https://doi.org/10.1007/s12665-009-0304-1
Zhang CB, Chen LH, Liu YP, Ji XD, Liu XP (2010) Triaxial compression test of soil-root composites to evaluate influence of roots on soil shear-strength. Ecological Engineering. 36: 19-26.
DOI: https://doi.org/10.1016/j.ecoleng.2009.09.005
How to Cite
Rachmawati, S. H., Hossain, Z. and Shiau, J. (2020) “Shear strength of soil by using clam shell waste as recycle aggregate”, Journal of Agricultural Engineering, 51(3), pp. 155–160. doi: 10.4081/jae.2020.1043.
PAGEPress has chosen to apply the Creative Commons Attribution NonCommercial 4.0 International License (CC BY-NC 4.0) to all manuscripts to be published.
Similar Articles
- Francesca Piazzolla, Maria Luisa Amodio, Giancarlo Colelli, Spectra evolution over on-vine holding of Italia table grapes: prediction of maturity and discrimination for harvest times using a Vis-NIR hyperspectral device , Journal of Agricultural Engineering: Vol. 48 No. 2 (2017)
- Timothy Denen Akpenpuun, Qazeem Opeyemi Ogunlowo, Wook-Ho Na, Prabhat Dutta, Anis Rabiu, Misbaudeen Aderemi Adesanya, Mohammadreza Nariman, Ezatullah Zakir, Hyeon Tae Kim, Hyun-Woo Lee, Dynamic neural network modeling of thermal environments of two adjacent single-span greenhouses with different thermal curtain positions , Journal of Agricultural Engineering: Vol. 55 No. 2 (2024)
- Adisa A. Folami, Eberendu N. Obioha, Aderinlewo A. Adewole, Kuye S. Ibiyemi, Performance evaluation of a developed rice-processing machine , Journal of Agricultural Engineering: Vol. 47 No. 3 (2016)
- Daniel Veal, Lutz Damerow, Peter Schulze Lammers, Michael Blanke, Kinematic model for mechanical apple blossom thinning , Journal of Agricultural Engineering: Vol. 55 No. 1 (2024)
- Andrea Dell'Agnese, Bruno Mazzorana, Francesco Comiti, Patricia Von Maravic, Vincenzo D'agostino, Assessing the physical vulnerability of check dams through an empirical damage index , Journal of Agricultural Engineering: Vol. 44 No. 1 (2013)
- Salvatore Faugno, Luisa del Piano, Mariano Crimaldi, Gennaro Ricciardiello, Maura Sannino, Mechanical oil extraction of Nicotiana tabacum L. seeds: analysis of main extraction parameters on oil yield , Journal of Agricultural Engineering: Vol. 47 No. 3 (2016)
- Carlo Bibbiani, Carlo A. Campiotti, Luca Incrocci, Alberto Pardossi, Determination of the water diffusivity of horticultural substrates: comparison of different approaches for the one-step outflow data analysis , Journal of Agricultural Engineering: Vol. 44 No. 4 (2013)
- Raffaele Spinelli, Janine Schweier, Fabio De Francesco, Harvesting techniques for non-industrial SRF biomass plantations on farmland , Journal of Agricultural Engineering: Vol. 44 No. s2 (2013): Proceedings of the 10th Conference of the Italian Society of Agricultural Engineering
- Andrea Rosario Proto, Alois Skoupy, Giorgio Macri, Giuseppe Zimbalatti, Time consumption and productivity of a medium size mobile tower yarder in downhill and uphill configurations: a case study in Czech Republic , Journal of Agricultural Engineering: Vol. 47 No. 4 (2016)
- Andrey Linenko, Bulat Khalilov, Timur Kamalov, Marat Tuktarov, Damir Syrtlanov, Effective technical ways to improve the vibro-centrifugal separator electric drive for grain cleaning , Journal of Agricultural Engineering: Vol. 52 No. 2 (2021)
<< < 12 13 14 15 16 17 18 19 20 21 > >>
You may also start an advanced similarity search for this article.
