https://doi.org/10.4081/jae.2020.1043
Shear strength of soil by using clam shell waste as recycle aggregate
Published: 29 September 2020
Abstract Views: 1157
PDF: 541
HTML: 53
HTML: 53
Publisher's note
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
Authors
Every year in Japan, industry and household consumption generate a significant amount of clam shell waste. It has inevitably imposed a negative impact on the national environment and economics. To reduce those effects, this study proposes the reutilisation of abandoned clam shell for ground improvement. An experimental study was conducted to evaluate the shear strength of this new construction material. Soils were mixed with various percentages of clam shells as well as cement. The new soil-clam shellcement samples were tested under the triaxial consolidateddrained tests (CD tests). Test results showed that the addition of clam shell and cement in the soil leads to increase deviatoric stress. Furthermore, shear strength parameters of specimens were quantified in terms of cohesion and frictional resistance. Based on the results of the current study, it was concluded that approximately 9.50% increase of frictional angle can be achieved whilst the cohesion can only be improved by 6%. This new construction material can be used in the future for the base course of unpaved roads in agriculture engineering applications.
Agustini TW, Fahmi AS, Widowati I, Sarwono A (2011) Utilization of Asian moon scallop (Amusium pleuronectes) shell waste on making of calcium-rich cookies (in Indonesian). Indonesian Fisheries Processing Journal. 1: 8-13.
Arora KR (1978) Soil Mechanics and Foundation Engineering. Nai Sarak-Delhi: Standard Publishers Distributors. Ch: 13
Consoli NC, Prietto PDM, Ulbrich LA (1998) Influence of fiber and cement addition on behavior of sandy soil. Journal Geotechnical Geoenvironmental. Eng. 124: 1211-1214.
Das BM (2007) Fundamentals of Geotechnical Engineering, Third Edition, United States: SI Cencage Learning, Ch: 3
Downey R, Marsh L, Flick GJF Jr. (2012) The seafood industry: species, products, processing and safety-2nd ed. Balckwell Publishing. Ltd. 76-77.
Hosain Md.Z, Narioka H, Sakai T. (2006). Effect of ordinary Portland-cement on properties of clayey soil in Mie Prefecture. J. Jpn. Soc. Soil. Phys. 103:31-38.
Hossain Md.Z, Sakai T (2008) The effectiveness of nominal dosage of ordinary cement on strength and permeability of clayey soil. J. Jpn. Soc. Soil Phys. 110:25-35.
Hossain MZ (2013) Waste shell husks concrete: durability, permeability and mechanical properties. J. of Building Construction and Planning Research. 1: 61-66.
DOI: https://doi.org/10.4236/jbcpr.2013.13009
JGS 0524 (2001) Method for consolidated-drained triaxial compression test on soils, Japan Geotechnical Society. Dositsu Shiken Hou, Dositsu Kogakkai (in Japanese). 233-243.
Li HY, Tan YQ, Zhang L, Zhang YX, Song YH, Ye Y, Xia MS (2012) Bio-filler from waste shellfish shell: preparation, characterization, and its effect on the mechanical properties on polypropylene composites. J. of Hazard Mater. 217-218: 256-262.
Motamedi S, Shamshirband S, Hashim R, Petkovic D, Roy C (2015) Estimating unconfined compressive strength of cockle shell-cement-sand mixtures using soft computing methodologies. Engineering Structures. 98: 49-58.
DOI: https://doi.org/10.1016/j.engstruct.2015.03.070
Mouazen A M, Ramon H, Baerdemaker JD (2002) Effects of bulk density and moisture content on selected mechanical properties of sandy loam soil. Biosystem Engineering. 83: 217-224.
Park K., Jun S, Kim D (2014) Effect of strength enhancement of soil treated with environment-friendly calcium carbonate powder. The Scientific World Journal. 2014: 1-11.
DOI: https://doi.org/10.1155/2014/526491
Rachmawati SH, Zakaria MZ (2017) Utilization of Utilization of waste shell husks for ground improvement. International Agricultural Engineering Journal. 26: 11-18.
Rachmawati SH, Hossain Z, Shiau J (2018) Agriculture land development using shell husk as recycle aggregate. Agricultural Engineering International: CIGR Journal. 20: 45-51.
Sariosseiri F, Muhunthan B (2009) Effect of cement treatment on geotechnical properties of some Washington State soils. Engineering Geology. 104: 119-125.
DOI: https://doi.org/10.1016/j.enggeo.2008.09.003
Vaughan (2001) Gladys arched collection on Family: Mactridae (surf or trough clams, Mactras). Washington State University. Accessed 10 February 2018.
Yoon G L, Yoon YW, Chae, KS (2009) Shear strength and compressibility of oyster shell-sand mixtures. J. Environ Earth Sci. 60: 1701-1709.
DOI: https://doi.org/10.1007/s12665-009-0304-1
Zhang CB, Chen LH, Liu YP, Ji XD, Liu XP (2010) Triaxial compression test of soil-root composites to evaluate influence of roots on soil shear-strength. Ecological Engineering. 36: 19-26.
DOI: https://doi.org/10.1016/j.ecoleng.2009.09.005
How to Cite
Rachmawati, S. H., Hossain, Z. and Shiau, J. (2020) “Shear strength of soil by using clam shell waste as recycle aggregate”, Journal of Agricultural Engineering, 51(3), pp. 155–160. doi: 10.4081/jae.2020.1043.
PAGEPress has chosen to apply the Creative Commons Attribution NonCommercial 4.0 International License (CC BY-NC 4.0) to all manuscripts to be published.
Similar Articles
- Andrea Casson, Valentina Giovenzana, Alessio Tugnolo, Alessia Pampuri, Ilaria Fiorindo, Roberto Beghi, Riccardo Guidetti, Assessment of an expanded-polypropylene isothermal box to improve logistic sustainability of catering services , Journal of Agricultural Engineering: Vol. 52 No. 2 (2021)
- Maile Zhou, Jiajia Yang, Tingbo Xu, Jianjun Yin, Xinzhong Wang, Optimal design of transplanting mechanism with differential internal engagement non-circular gear trains , Journal of Agricultural Engineering: Vol. 53 No. 3 (2022)
- Francesca Piazzolla, Maria Luisa Amodio, Giancarlo Colelli, The use of hyperspectral imaging in the visible and near infrared region to discriminate between table grapes harvested at different times , Journal of Agricultural Engineering: Vol. 44 No. 2 (2013)
- Philip Pichler, Martin Leitner, Florian Grün, Christoph Guster, Experimental determination of highly dynamic forces during wood trunk comminution with a drum chipper , Journal of Agricultural Engineering: Vol. 49 No. 2 (2018)
- Pietro Catania, Filippa Bono, Claudio De Pasquale, Mariangela Vallone, Closed tank pneumatic press application to improve Sauvignon Blanc wine quality and nutraceutical properties , Journal of Agricultural Engineering: Vol. 50 No. 4 (2019)
- Chantal Erbino, Alessandro Toccolini, Ilda Vagge, Paolo Stefano Ferrario, Guidelines for the design of a healing garden for the rehabilitation of psychiatric patients , Journal of Agricultural Engineering: Vol. 46 No. 2 (2015)
- Wioleta Radawiec, Janusz Gołaszewski, Barbara Kalisz, Solid tailings after supercritical CO2 extraction of lignocellulosic biomass as a source of quality biochar for energetic use and as soil improvement , Journal of Agricultural Engineering: Vol. 54 No. 3 (2023)
- Bhola Paudel, Jayanta Kumar Basak, Seong Woo Jeon, Gun Ho Lee, Nibas Chandra Deb, Sijan Karki, Hyeon Tae Kim, Working speed optimization of the fully automated vegetable seedling transplanter , Journal of Agricultural Engineering: Vol. 55 No. 2 (2024)
- Daniele Duca, Andrea Pizzi, Manuela Mancini, Giorgio Rossini, Chiara Mengarelli, Alessio Ilari, Giulia Lucesoli, Giuseppe Toscano, Ester Foppa Pedretti, Fast measurement by infrared spectroscopy as support to woody biofuels quality determination , Journal of Agricultural Engineering: Vol. 47 No. 1 (2016)
- Raffaele Cavalli, Stefano Grigolato, Marco Pellegrini, The evolution of a mountain road network from its original use during the First World War to meeting today’s forestry needs: current management , Journal of Agricultural Engineering: Vol. 43 No. 3 (2012)
<< < 1 2 3 4 5 6 7 8 9 10 > >>
You may also start an advanced similarity search for this article.
