https://doi.org/10.4081/jae.2021.1090
The design of a force feedback soft gripper for tomato harvesting
Published: 18 March 2021
Abstract Views: 4403
PDF: 1603
HTML: 683
HTML: 683
Publisher's note
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
Authors
In smart farming, both artificial intelligence and robotic systems are applied in order to improve efficiency. In agriculture, for jobs such as seeding, monitoring, and harvesting, robots are widely used. When using robots to harvest fruit and vegetables, it is essential not to apply excessive force, as it may damage the harvest. In this paper, a soft robotic three-fingered gripper is presented. It was designed and analysed using the finite element method. Each finger is made of silicone rubber. The shape of the finger is designed so that it is capable of handling spherical shaped objects, such as tomatoes or oranges. When holding a tomato, the fingers apply the contact force. The fingers are actuated pneumatically and the force applied is also controlled by a micro controller. The pressure inside the air chamber of the finger is in the range of 0- 95 kPa. Force sensors are attached to the end of each finger to provide force feedback. Then, the holding force is adjusted and applied to the surface of the tomato. The gripper can successfully grasp tomatoes with a force less than the bio-yield of the tomatoes 2.57 N.
Bernardi L., Hopf R., Ferrari A., Ehret A.E., Mazza E. 2017. On the large strain deformation behavior of silicone-based elastomers for biomedical applications. Polym. Test. 58:189-98.
DOI: https://doi.org/10.1016/j.polymertesting.2016.12.029
Brown E., Rodenberg N., Amend J., Mozeika A., Steltz E., Zakin M. R., Lipson H., Jaeger H.M. 2010. Universal robotic gripper based on the jamming of granular material. Proc. Natl. Acad. Sci. 107:18809-14.
DOI: https://doi.org/10.1073/pnas.1003250107
Hao Y., Liu Z., Liu J., Fang X., Fang B., Nie S., Guan Y., Sun F., Wang T., Wen L. 2020. A soft gripper with programmable effective length, tactile and curvature sensory feedback. Smart Mater. Struct. 29:035006.
Hayashi S., Ganno K., Ishii Y., Tanaka I. 2002. Robotic harvesting system for eggplants. JARQ. 36:163-68.
DOI: https://doi.org/10.6090/jarq.36.163
Ji C., Zhang J., Yuan T. , Li W. 2014. Research on key technology of truss tomato harvesting robot in greenhouse. Appl. Mech. Mater. 442:480-86.
Jinliang G., Zhao D., Wei J., Wu X. 2010. Design and control of the open apple-picking-robot manipulator. pp 5-8 in 3rd Int. Conf. Comp. Sci. Info. Tech., Chengdu, China.
DOI: https://doi.org/10.1109/ICCSIT.2010.5564770
Lehnert C., English A., McCool C., Tow A.W., Perez T. 2017. Autonomous sweet pepper harvesting for protected cropping systems. IEEE Rob. Autom. Lett. 2:872-9.
DOI: https://doi.org/10.1109/LRA.2017.2655622
Liu J., Li P., Li Z. 2007. A multi-sensory end-effector for spherical fruit harvesting robot. pp 258-62 in IEEE Int. Conf. Autom. Logist., Jinan, China.
DOI: https://doi.org/10.1109/ICAL.2007.4338567
Liu J., Li Z., Wang F., Li P., Xi N. 2013. Hand-arm coordination for a tomato harvesting robot based on commercial manipulator. pp 2716-20 in IEEE Int. Conf. Rob. Biomimetics, Shenzhen, China.
DOI: https://doi.org/10.1109/ROBIO.2013.6739884
Monta M., Kondo N., Ting K.C. 1998. End-effectors for tomato harvesting robot. J. Artif. Intell. Rev. 12:11-25.
DOI: https://doi.org/10.1023/A:1006595416751
Mosadegh B., Polygerinos P., Keplinger C., Wennstedt S., Shepherd R.F., Gupta U., Shim J., Bertoldi K., Walsh C.J., Whitesides G.M. 2014. Soft robotics: pneumatic networks for soft robotics that actuate rapidly. Adv. Funct. Mater 24:2109.
DOI: https://doi.org/10.1002/adfm.201470092
Sirisomboon P., Tanaka M., Kojima T. 2012. Evaluation of tomato textural mechanical properties. J. Food Eng. 111:618-24.
DOI: https://doi.org/10.1016/j.jfoodeng.2012.03.007
Truby R.L., Wehner M., Grosskopf A.K., Vogt D.M., Uzel S.G.M., Wood R.J., Lewis J.A. 2018. Soft somatosensitive actuators via embedded 3D printing. Adv. Mater. 30:1706383.
DOI: https://doi.org/10.1002/adma.201706383
van Henten E.J., Hemming J., van Tuijl B.A.J., Kornet J.G., Meuleman J., Bontsema J., van Os E.A. 2002. An autonomous robot for harvesting cucumbers in greenhouses. Auton. Rob. 13:241-58.
DOI: https://doi.org/10.1023/A:1020568125418
Wang G., Yu Y., Feng Q. 2016. Design of end-effector for tomato robotic harvesting. IFAC-Papers OnLine 49:190-3.
DOI: https://doi.org/10.1016/j.ifacol.2016.10.035
Wang Z., Zhu M., Kawamura S., Hirai S. 2017. Comparison of different soft grippers for lunch box packaging. Rob. Biomimet. 4:10.
DOI: https://doi.org/10.1186/s40638-017-0067-1
How to Cite
Kultongkham, A. (2021) “The design of a force feedback soft gripper for tomato harvesting”, Journal of Agricultural Engineering, 52(1). doi: 10.4081/jae.2021.1090.
Copyright (c) 2021 the Author(s)
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
PAGEPress has chosen to apply the Creative Commons Attribution NonCommercial 4.0 International License (CC BY-NC 4.0) to all manuscripts to be published.
Similar Articles
- Weronika Ptak, Jarosław Czarnecki, Marek Brennensthul, Use of 3D scanning technique to determine tire deformation in static conditions , Journal of Agricultural Engineering: Vol. 53 No. 1 (2022)
- Daniele Duca, Giuseppe Toscano, Andrea Pizzi, Giorgio Rossini, Sara Fabrizi, Giulia Lucesoli, Andrea Servili, Valeria Mancini, Gianfranco Romanazzi, Chiara Mengarelli, Evaluation of the characteristics of vineyard pruning residues for energy applications: effect of different copper-based treatments , Journal of Agricultural Engineering: Vol. 47 No. 1 (2016)
- Angelo Fabbri, Chiara Cevoli, Giuseppe Cantalupo, A method for handlebars ballast calculation in order to reduce vibrations transmissibility in walk behind tractors , Journal of Agricultural Engineering: Vol. 48 No. 2 (2017)
- Ye-jin Seo, Eunmi Hong, Jong-hyuk Lee, Young-joon Jeong, Byung-hun Seo, Soojin Jun, Seung-Jae Lee, Won Choi, Comparative study of coating agents for prevention of fine-dust-induced light transmittance reduction in greenhouse covering materials , Journal of Agricultural Engineering: Vol. 53 No. 2 (2022)
- Monica C. M. Parlato, Carlos Rivera-Gómez, Simona M. C. Porto, Reuse of livestock waste for the reinforcement of rammed-earth materials: investigation on mechanical performances , Journal of Agricultural Engineering: Vol. 54 No. 2 (2023)
- Qazeem Opeyemi Ogunlowo, Adedayo Afeez Azeez, Wook Ho Na, Anis Rabiu, Misbaudeen Aderemi Adesanya, Ezatullah Zakir, John Ademola Ijadunola, Bukola Olanrewaju Afolabi, Babajide Saheed Kosemani, Titus Adeyinka Ilori, Hyun-Woo Lee, Analysis of microclimate temperature and relative humidity distribution of local poultry house in a subtropical area of Nigeria , Journal of Agricultural Engineering: Vol. 55 No. 2 (2024)
- Marko Milan Kostić, Nataša Ljubičić, Vladimir Aćin, Milan Mirosavljević, Maša Budjen, Miloš Rajković, Nebojša Dedović, An active-optical reflectance sensor in-field testing for the prediction of winter wheat harvest metrics , Journal of Agricultural Engineering: Vol. 55 No. 1 (2024)
- Hui Yang, Yuhao Li, Chengguo Fu, Rongxian Zhang, Haibo Li, Yipeng Feng, Yaqi Zhang, Hongbin Cong, Fuquan Nie, Research on inspection route of hanging environmental robot based on computational fluid dynamics , Journal of Agricultural Engineering: Vol. 55 No. 2 (2024)
- Lara Riguccio, Giovanna Tomaselli, Laura Carullo, Danilo Verde, Patrizia Russo, Identifying areas suitable for wine tourism through the use of multi-criteria and geographic information system: the method and its application in the countryside around Mount Etna (Sicily) , Journal of Agricultural Engineering: Vol. 48 No. 2 (2017)
- Melis Inalpulat, Monitoring and multi-scenario simulation of agricultural land changes using Landsat imageries and future land use simulation model on coastal of Alanya , Journal of Agricultural Engineering: Vol. 55 No. 1 (2024)
<< < 8 9 10 11 12 13 14 15 16 17 > >>
You may also start an advanced similarity search for this article.
