https://doi.org/10.4081/jae.2022.1303
Effect of variable chipping clearance and operational speed on the cassava chip geometry
Published: 28 June 2022
Abstract Views: 552
PDF: 324
HTML: 108
HTML: 108
Publisher's note
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
Authors
Most cassava chipping machines adopt the fixed chipping clearance at different speeds accounting for inconsistencies in chip geometries. These irregularities influence drying time and may cause fermentation, culminating in poor quality and safety of dried chips. The need to develop a variable chipping machine capable of producing varied chip sizes for different uses necessitated this research. The main objective of this study was to develop and test the impact of a cassava chipping machine with a variable clearance and varying cutting speed on chip geometry. Drum operation speeds of 460 rpm, 730 rpm, and 800 rpm, and chipping clearances of 6 mm, 18 mm, and 28 mm were considered in this study. The study considered two twelve-month maturing varieties of cassava. These varieties were the Ampong (an improved variety) and Ankrah (a local variety). Processing time was varied between freshly harvested (FH) and 48 h after harvest (48AH). The initial moisture contents of the Ampong variety were 68.1% and 65.4% wet basis for the FH and 48AH samples, respectively. The Ankrah variety recorded 66.0% and 61.0% wet basis for FH and 48AH samples, respectively. Results from the performance evaluation test indicated that operational speed and chipping clearance had a significant effect (P<0.05) on the chips’ length, width, and thickness. Ankrah variety recorded the shortest mean chip length at 6 mm clearance and 730 rpm for the FH samples. On the other hand, Ampong samples at 730 rpm and 18 mm machine clearance recorded the shortest mean chip length for the 48AH samples.
Acheampong P.P., Danquah E.O., Agyeman K., Dankwa K.O., Addison M. 2021. Research and development for improved cassava varieties in Ghana: ‘Farmers’ adoption and effects on livelihoods. Available from: https://doi.org/10.5772/97588-76626
Adejumo A.O., Oradugba O.B., Ilori T.A., Adenekan M.O. 2011. Development and evaluation of a cassava chipping machine. J. Raw Matls. Res. 3:1-7.
Ahorsu S., Ofori H., Kumah E., Budu M., Bosrotsi C.K., Aveyiri J. 2021. Development of HTU-model variable chipping clearance cassava chipper. Res. Agr. Eng. 67:171-80.
DOI: https://doi.org/10.17221/102/2020-RAE
Ajibola O.O., Faborode M.O., Salami T.K., Okpe B.S. 1991. Development of a cassava chipping machine. In Symposium on Tropical Root Crops in a Developing Economy. 380:287-92.
DOI: https://doi.org/10.17660/ActaHortic.1994.380.45
Ariavie G.O., Ohwovoriole E.N. 2002. Improved ‘Ohwovoriole’s rotary cassava tuber peeling machine. Nigerian J. Eng. Res. Devt. 1:61-3.
Awulu J.O., Audu J., Jibril Y.M. 2015. Development of cassava (Manihot) chipping machine using electric motor cum manual operation. J. Harm. Res. Eng. 3:78-84.
Ayetigbo O., Latif S., Abass A., Müller J. 2018. Comparing characteristics of root, flour and starch of biofortified yellow-flesh and white-flesh cassava variants, and sustainability considerations: A review. Sustainability. 10:3089.
DOI: https://doi.org/10.3390/su10093089
Bolaji B.O., Adejuyigbe S.B., Ayodeji S.P. 2008. Performance evaluation of a locally developed cassava chipping machine. South African J. Ind. Eng. 19:169-78.
DOI: https://doi.org/10.7166/19-1-113
Egbeocha C.C., Asoegwu S.N., Okereke N.A. 2016. A review on performance of cassava peeling machines in Nigeria. Futo J. Series (FUTOJNLS). 2:140-68.
Elohor O.U., Olasunkanmi S.G., Kehinde A.T. 2008. Studies on the production and utilization of dried cassava chips as human food. In: Robertson G.L., Lupien J R. (Eds), Development International Union of Food Science & Technology, Chpt. 17.
Falade K.O., Akingbala J.O. 2010. Utilization of cassava for food. Food Rev. Int. 27:51-83.
DOI: https://doi.org/10.1080/87559129.2010.518296
FAO, 2005. Proc. 2nd Cassava in Africa with country case studies on the global cassava development strategy. Nigeria, Ghana, the United Republic of Tanzania, Uganda and Benin.
Gro Intelligence. 2015. Cassava production and processing. Available from: https://www.gro-intelligence.com/insights/articles/cassava-production-and-processing Accessed: 25 November 2019.
Igbeka J.C., Jory M., Griffon D. 1992. Selective mechanization for cassava processing. J. Agric. Mechanization. Asia, Africa and Latin America (AMA). Tokyo. 23:45-50.
Iyer S., Mattinson D.S., Fellman J.K. 2010. Study of the early events leading to cassava root post-harvest deterioration. Trop. Plant Biol. 3:151-65.
DOI: https://doi.org/10.1007/s12042-010-9052-3
Okechukwu R., James B., Abass A., Fannah S., Maziya-Dixon B., Sanni L., Osei-Sarfoh A., Fomba S. Lukombo S. 2012. Producing gari from cassava: An illustrated guide for smallholder cassava processors. Intnl. Inst. of Trop. Agric. (IITA): Ibadan, Nigeria.
Oladipo N.O., Ogunjirin O.A., Abiodun L.O., Bello M.K. 2021. Effect of operating speed and chipping disc blade number on the performance of a motorised cassava chipping machine. Int. J. Agric. Biol. Sci. 54-62.
Oyedeji O.A., Agbetoye L.A.S., Adedeji O.T. 2011. Development and performance evaluation of a cassava stem planter: A case study.11th International conference for Nigerian Institution of Agricultural Engineers Ilorin Nigeria.
Pornpraipech P., Khusakul M., Singklin R., Sarabhorn P., Areeprasert C. 2017. Effect of temperature and shape on drying performance of cassava chips. Agric. Nat. Res. 51:402-9.
DOI: https://doi.org/10.1016/j.anres.2017.12.004
Saravanan R.A.J.U., Ravi V., Stephen R., Thajudhin S., George J. 2016. Post-harvest physiological deterioration of cassava (Manihot esculenta). A review. Indian J. Agric. Sci. 86:1383-90.
Taiwo A., Fashina A.B., Ola F.A. 2014. Evaluation of a cabinet dryer developed for cassava chips. Int. J. Appl. Agric. Agric. Res. 10:10-20.
Usman M.A., Idakkwo P.Y. 2011. Size reduction of cassava chips and the drying rate. J. Res. Nat. Dev. 9:79-87.
Westby A. 2002. Cassava utilization, storage and small-scale processing. In: Hillocks R.J., Thresh J.M., Bellotti A.C. (Eds.), Cassava biology, production and utilization. CABI Publ. Oxfordshire, UK, pp 480.
DOI: https://doi.org/10.1079/9780851995243.0281
How to Cite
Ahorsu, S. K. (2022) “Effect of variable chipping clearance and operational speed on the cassava chip geometry”, Journal of Agricultural Engineering, 53(2). doi: 10.4081/jae.2022.1303.
Copyright (c) 2022 the Author(s)
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
PAGEPress has chosen to apply the Creative Commons Attribution NonCommercial 4.0 International License (CC BY-NC 4.0) to all manuscripts to be published.
Similar Articles
- Yufan He, Qingzhen Zhu, Weiqiang Fu, Changhai Luo, Yue Cong, Wuchang Qin, Zhijun Meng, Liping Chen, Chunjiang Zhao, Guangwei Wu, Design and experiment of a control system for sweet potato seedling-feeding and planting device based on a pre-treatment seedling belt , Journal of Agricultural Engineering: Vol. 53 No. 3 (2022)
- Thanaporn Singhpoo, Khwantri Saengprachatanarug, Seree Wongpichet, Jetsada Posom, Kanda Runapongsa Saikaew, Cassava stalk detection for a cassava harvesting robot based on YOLO v4 and Mask R-CNN , Journal of Agricultural Engineering: Vol. 54 No. 2 (2023)
- Vidas Damanauskas, Algirdas Janulevičius, Effect of tillage implement (spring tine cultivator, disc harrow), soil texture, forward speed, and tillage depth on fuel consumption and tillage quality , Journal of Agricultural Engineering: Vol. 53 No. 3 (2022)
- Saddam Hussain, Decong Zheng , Haiyan Song, Muhammad Usman Farid, Abdul Ghafoor, Xinyi Ba, Hao Wang, Wenjun Wang, Alam Sher, Salah Jumaa Alshamali, Computational fluid dynamics simulation and optimisation of the threshing unit of buckwheat thresher for effective cleaning of the cleaning chamber , Journal of Agricultural Engineering: Vol. 53 No. 1 (2022)
- Shanwen Zhang, Yongyuan Sun, Su Lu, Li Wang, Sian Liu, Zhongliu Wang, Min Dai, Jicheng Gao, Hong Miao, Design and experiment of brush-roller ginkgo leaf picker for the dwarf dense planting mode , Journal of Agricultural Engineering: Vol. 54 No. 4 (2023)
- Bhola Paudel, Jayanta Kumar Basak, Seong Woo Jeon, Gun Ho Lee, Nibas Chandra Deb, Sijan Karki, Hyeon Tae Kim, Working speed optimization of the fully automated vegetable seedling transplanter , Journal of Agricultural Engineering: Vol. 55 No. 2 (2024)
- Shadrack Kwadwo Amponsah, Ahmad Addo, Komla Dzisi, Jean Moreira, Sali Atanga Ndindeng, Comparative evaluation of mechanised and manual threshing options for Amankwatia and AGRA rice varieties in Ghana , Journal of Agricultural Engineering: Vol. 48 No. 4 (2017)
- Daniel Veal, Lutz Damerow, Peter Schulze Lammers, Michael Blanke, Kinematic model for mechanical apple blossom thinning , Journal of Agricultural Engineering: Vol. 55 No. 1 (2024)
- Yanmei Meng, Tingting Zhang, Jin Wei, Jinlai Zhang, Xulei Zhai, Design and experiments of an automatic pipe winding machine , Journal of Agricultural Engineering: Vol. 54 No. 2 (2023)
- Hui Yang, Yuhao Li, Chengguo Fu, Rongxian Zhang, Haibo Li, Yipeng Feng, Yaqi Zhang, Hongbin Cong, Fuquan Nie, Research on inspection route of hanging environmental robot based on computational fluid dynamics , Journal of Agricultural Engineering: Vol. 55 No. 2 (2024)
You may also start an advanced similarity search for this article.
