https://doi.org/10.4081/jae.2023.1429
Design and experiments of an automatic pipe winding machine
Published: 1 August 2023
Abstract Views: 1218
PDF: 441
HTML: 110
HTML: 110
Publisher's note
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
Authors
To solve the time-consuming and laborious problem of manual winding and unwinding water pipes by field workers during irrigation or pesticide spraying in agricultural production, an automatic pipe winding machine for winding and unwinding water pipes was designed. The guiding mechanism, pipe winding mechanism, and pipe arrangement mechanism of the pipe winding machine are designed, and the automatic deviation correction control method of pipe arrangement based on PID and the constant tension control method of pipe winding and unwinding is put forward, and the control system of the automatic pipe winding machine is developed. By making a prototype of an automatic pipe winding machine, the effects of pipe winding and unwinding and the constant tension control of the automatic winding machine are tested and analyzed. The test results show that under the condition of 4.0 km/h speed, the maximum angle error of the automatic pipe winding machine is 3.32°, the average absolute error is 0.95°, and the water pipes are arranged neatly and tightly. The maximum relative error of the water pipe tension is 9.3%, and the maximum relative error under the 0~4.0 km/h velocity step variable condition is 16.3%. The speed of the pipe winding and unwinding can adapt to the change of the vehicle’s speed automatically, and the tension of the pipe is within a reasonable range. The performance of the pipe arrangement and pipe coiling of the automatic pipe winding machine can meet the operating requirements.
Cao S. 2021. Analysis of winding tension control method of winding machine. China Rubber Ind. 68:212-5.
Cuello G.H., Carbajal E.R., Petiton J.P. 2019. Mechanization of irrigation in Latin America. AMA-Agr. Mech. Asia AF. 50:52- 6.
Drexler D.A., Virágh E., Tóth, J. 2018. Controllability and reachability of reactions with temperature and inflow control. Fuel. 211:906-11.
DOI: https://doi.org/10.1016/j.fuel.2017.09.095
Fan X., Zhang W., Chen W., Chen B. 2020. Land-water-energy nexus in agricultural management for greenhouse gas mitigation. Appl. Energ. 265:114796.
DOI: https://doi.org/10.1016/j.apenergy.2020.114796
Ge M., Wu P., Zhu D., Zhang L., Cai Y. 2020. Optimized configuration of a hose reel traveling irrigator. Agr. Water Manage. 2401:106302.
DOI: https://doi.org/10.1016/j.agwat.2020.106302
Li Q., Bai J., Fan Y., Zhang, Z. 2015. Study of wire tension control system based on closed loop PID control in HS-WEDM. Int. J. Adv. Manuf. Tech. 82:1089-97.
DOI: https://doi.org/10.1007/s00170-015-7412-8
National standard of the People’s Republic of China: AQSIQ & SAC, 2011a. Small-size light piping water irrigation machines. GB/T 25405-2010. Standards Press of China, Beijing, China.
National standard of the People’s Republic of China: AQSIQ & SAC, 2011b. Agricultural and forestry machinery-Safety-Part 18:Reel machines for irrigation. GB 10395.18-2010. Standards Press of China, Beijing, China.
National standard of the People’s Republic of China: AQSIQ & SAC, 2008. Traveller irrigation machines - Part 1: Operational characteristics and laboratory and field test methods. GB/T 21400.1-2008. Standards Press of China, Beijing, China.
Sui R., Yan H. 2017. Field study of variable rate irrigation management in humid climates. Irrig. Drain. 66:327-39.
DOI: https://doi.org/10.1002/ird.2111
Tang L., Yuan S., Tang Y. 2018. Analysis on research progress and development trend of hose reel irrigator. Trans. Chinese Soc. Agric. Machine. 49:1-15.
Tao T., Fan Z. 2010. Design drawing and rolling machine on the type of XSP800. Machine. Design Manufact. 2:12-4.
Valenzuela M.A., Carrasco R., Sbarbaro D. 2007. Robust sheet tension estimation for paper winders. pp 1937-1949 in Conference Record of 2007 Annual Pulp and Paper Industry Technical Conference. IEEE, Tampa, FL, USA.
DOI: https://doi.org/10.1109/PAPCON.2007.4286294
Wang J., Chang D. 2012. Composition analysis of spooling tension about automatic winder. pp 501:572-576 in Asian Workshop on Polymer Processing , KEM, Qingdao, China.
DOI: https://doi.org/10.4028/www.scientific.net/KEM.501.572
Wang Y., Schmitz A., Kobayashi K., Lopez J.A.A., Wang W., Matsuo Y., Sakamoto Y., Sugano, S. 2017. Exploiting the slip behavior of friction based clutches for safer adjustable torque limiters. pp 1346-1351 in 2017 IEEE International Conference on Advanced Intelligent Mechatronics (AIM), Munich, Germany.
DOI: https://doi.org/10.1109/AIM.2017.8014205
Xie H., Duan X., Yang H., Liu, Z. 2012. Automatic trajectory tracking control of shield tunneling machine under complex stratum working condition. Tunn. Undergr. Sp. Tech. 32:87-97.
DOI: https://doi.org/10.1016/j.tust.2012.06.002
Xu X., Zhang W., Ding, X., Zhang, M., Wei, S. 2018. Design and analysis of a novel tension control method for winding machine. Chin. J. Mech. Eng-EN, 31.
DOI: https://doi.org/10.1186/s10033-018-0304-8
Yan H., Hui X., Li M., Xu, Y. 2020. Development in sprinkler irrigation technology in China. Irrig. Drain. 69:75-87.
DOI: https://doi.org/10.1002/ird.2435
Ye X., Liu H., Zhang X., Ma J., Han B., Li W., Zou H., Zhang Y., Lin, X. 2019. Impacts of irrigation methods on greenhouse gas emissions/absorptions from vegetable soils. J. Soil Sediment. 20:723-33.
DOI: https://doi.org/10.1007/s11368-019-02422-3
Yoneyama M., Ma S., Hirose S. 2014. Development of unicorn reel: hermetic traction-controllable cable reel with passivelever level winder. pp 1180-1185 in 2014 IEEE Int. Confe. Rob. Biomimetics, Bali, Indonesia.
DOI: https://doi.org/10.1109/ROBIO.2014.7090493
Yu Y., Zhang Y., Yuan X., Hou Q. 2014. A LabVIEW-based realtime measurement system for polarization detection and calibration. Optik - Int. J. Light Electron Opt. 125:2256-60.
DOI: https://doi.org/10.1016/j.ijleo.2013.10.079
Yuan S., Li H., Wang X. 2015. Status, problems, trends and suggestions for water-saving irrigation equipment in China. J. Irrig. Drain. Eng. 1:78-92.
Zou X., Li Y., Li K., Cremades R., Gao Q., Wan Y., Qin X. 2013. Greenhouse gas emissions from agricultural irrigation in China. Mitig. Adapt. Strat. Gl. 20:295-315.
DOI: https://doi.org/10.1007/s11027-013-9492-9
How to Cite
Meng, Y. (2023) “Design and experiments of an automatic pipe winding machine”, Journal of Agricultural Engineering, 54(2). doi: 10.4081/jae.2023.1429.
Copyright (c) 2023 the Author(s)
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
PAGEPress has chosen to apply the Creative Commons Attribution NonCommercial 4.0 International License (CC BY-NC 4.0) to all manuscripts to be published.
Similar Articles
- Alessia Tonon, Lorenzo Picco, Diego Ravazzolo, Mario Aristide Lenzi, Using a terrestrial laser scanner to detect wood characteristics in gravel-bed rivers , Journal of Agricultural Engineering: Vol. 45 No. 4 (2014)
- Eva Audrey Yessito Houessou-Dossou, John Mwangi Gathenya, Mugwima Njuguna, Zachary Abiero Gariy, Andrea Petroselli, Comparative analysis of flood and rainfall frequency in the ungauged sub-watersheds of Kakia and Esamburumbur in Narok town, Kenya, using the EBA4SUB rainfall-runoff model , Journal of Agricultural Engineering: Vol. 53 No. 2 (2022)
- Lorenzo Picco, Luca Mao, Emanuel Rigon, Johnny Moretto, Diego Ravazzolo, Fabio Delai, Mario Aristide Lenzi, An update of the sediment fluxes investigation in the Rio Cordon (Italy) after 25 years of monitoring , Journal of Agricultural Engineering: Vol. 43 No. 3 (2012)
- Federico Preti, Paolo Tarolli, Andrea Dani, Simone Calligaro, Massimo Prosdocimi, LiDAR derived high resolution topography: the next challenge for the analysis of terraces stability and vineyard soil erosion , Journal of Agricultural Engineering: Vol. 44 No. s2 (2013): Proceedings of the 10th Conference of the Italian Society of Agricultural Engineering
- P. D'Antonio, C. D'Antonio, C. Evangelista, V. Doddato, The assessment of the sawmill noise , Journal of Agricultural Engineering: Vol. 44 No. s2 (2013): Proceedings of the 10th Conference of the Italian Society of Agricultural Engineering
- Ildar Badretdinov, Salavat Mudarisov, Eduard Khasanov, Ruslan Nasyrov, Marat Tuktarov, Operation technological process research in the cleaning system of the grain combine , Journal of Agricultural Engineering: Vol. 52 No. 2 (2021)
- J. Moretto, F. Delai, E. Rigon, L. Picco, M.A. Lenzi, Erosion - deposition evaluation through hybrid DTMs derived by LiDAR and colour bathymetry: the case study of the Brenta, Piave and Tagliamento rivers , Journal of Agricultural Engineering: Vol. 44 No. s2 (2013): Proceedings of the 10th Conference of the Italian Society of Agricultural Engineering
- Paolo Febbi, Corrado Costa, Paolo Menesatti, Luigi Pari, Determining wood chip size: image analysis and clustering methods , Journal of Agricultural Engineering: Vol. 44 No. s2 (2013): Proceedings of the 10th Conference of the Italian Society of Agricultural Engineering
- Daniele Pochi, Roberto Fanigliulo, Laura Fornaciari, Gennaro Vassalini, Marco Fedrizzi, Gino Brannetti, Cesare Cervellini, Levels of vibration transmitted to the operator of the tractor equipped with front axle suspension , Journal of Agricultural Engineering: Vol. 44 No. s2 (2013): Proceedings of the 10th Conference of the Italian Society of Agricultural Engineering
- Francisco Ayuga, Present and future of the numerical methods in buildings and infrastructures areas of biosystems engineering , Journal of Agricultural Engineering: Vol. 46 No. 1 (2015)
<< < 26 27 28 29 30 31 32 33 34 35 > >>
You may also start an advanced similarity search for this article.
