https://doi.org/10.4081/jae.2024.1552
Studies of tractor maintenance and replacement strategies of Wonji Shoa Factory, Ethiopia
Published: 23 January 2024
Abstract Views: 586
PDF: 198
HTML: 8
HTML: 8
Publisher's note
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
Authors
This study mainly focuses on tractor maintenance and replacement strategies to assess the impact of various parameters on the economic life of tractors in order to improve the value of a profitable management choice on selected tractor samples. Considering the preventive replacement policy, the total annual costs were estimated taking into account the repair and depreciation costs. At a 95% level of confidence for each approach, the statistical analysis program “IBM SPSS Statistics 26” was used. An empirical relation based on multiple regression analysis has been generated to predict the economic operational life of a tractor using per-unit repair cost and annual usage (hours). From the analysis, John Dear 333, SAME 130, New Holland 80, and Massy Ferguson 150 are not supposed to be used economically in the field after the fifth, seventh, sixth, and eighth years respectively at Wonji Shoa Sugar Factory due to increasing maintenance cost in present condition.
Abd Rani N.A., Baharum M.R., Akbar A.R.N., Nawawi A.H. 2015. Perception of Maintenance Management Strategy on Healthcare Facilities. Soc. Behav. Sci. 170:272-81.
DOI: https://doi.org/10.1016/j.sbspro.2015.01.037
Ajibade A.D., Odusina M.T., Rafiu A.A., Ayarinde A.W., Adeleke B.S., Babarinde S.N. 2014. The use of replacement model to determine the appropriate time to replace a deteriorating industrial equipment. IOSR J. Math. 10:9-13.
DOI: https://doi.org/10.9790/5728-10210913
Amiens E.O., Oisamoje M.D., Inegbenebor A.U. 2015. A Dynamic Programming Approach to Replacement of Transport Vehicles in Benin City, Nigeria. Br. J. Math. Comput. Sci. 6:204-14.
DOI: https://doi.org/10.9734/BJMCS/2015/15454
ASAE D497. 2000. Agricultural Machinery Management Data. Science. 85:350-7.
Bati Fedi G., Dereje Asefa F., Tafa Waktole A. 2022. Farm households’ perception about sugarcane out-growers scheme: Empirical evidence around Wonji/Shoa Sugar Factory. Cogent. Econ. Financ. Taylors Fransis J. 10:200.
DOI: https://doi.org/10.1080/23322039.2021.2009664
Calcante A., Fontanini L., Mazzetto F. 2013. Repair and maintenance costs of 4WD tractors and self-propelled combine harvesters in Italy. J. Agric. Eng. 4:10-5.
DOI: https://doi.org/10.4081/jae.2013.s2.e70
Cunha M, Gonçalves S.G. MACHoice: 2019. A decision support system for agricultural machinery management. Open Agric. 4:305-21.
DOI: https://doi.org/10.1515/opag-2019-0029
Dohi T., Ashioka A., Kaio N., Osaki S. 2006 Statistical estimation algorithms for repairs-time limit replacement scheduling under-earning rate criteria. Comput. Math. Appl. 51:345-56.
DOI: https://doi.org/10.1016/j.camwa.2005.11.004
Edwards W. 2019. Replacement strategies for farm machinery. Iowa State Uni. Ext. Outreach. pp 1-7.
Eilon S., King J.R., Hutchinson D.E. 1966. A Study in Equipment Replacement. J. Oper. Res. Soc. 17:59-71.
DOI: https://doi.org/10.1057/jors.1966.7
FAO. 2010. Agricultural mechanization in Mali and Ghana: strategies, experiences, and lessons for sustained impacts. Available from: https://www.fao.org/sustainable-agriculturalmechanization/resources/publications/details/fr/c/456121/
Kolhe K.P., Datta C.K. 2007. Prediction of Microstructure and Mechanical Properties of Multipass SAW. J. Mater. Process Tech. 197:241-9.
DOI: https://doi.org/10.1016/j.jmatprotec.2007.06.066
Kolhe K.P., Jadhav B.B. 2011. Testing and Performance Evaluation of Tractor Mounted Hydraulic Elevator for Mango Orchard. Am. J. Eng. Appl. Sci. 4:179-86.
DOI: https://doi.org/10.3844/ajeassp.2011.179.186
Kolhe K.P. 2014. Testing and ergonomically evaluation of tractor mounted. and self propelled coconut climber. Int. J. Eng. Technol. 3:357-62.
DOI: https://doi.org/10.15623/ijret.2014.0309057
Kolhe K.P. 2015. Stability analysis of tractor mounted hydraulic elevator for horticultural orchards. World J. Eng. 12:479-88.
DOI: https://doi.org/10.1260/1708-5284.12.5.479
Mbata J. 2012. Agribusiness indicators: Ethiopia. Tech. Rep. Agric. Rural Dev. RN:68237-E.
Mikler J. 2011. Life cycle costing used for justifying transition to predictive maintenance strategies. J. Mach. Eng. 11:49-58.
Nair S.K, Hopp W.J. 1992. A model for equipment replacement due to technological obsolescence. Eur. J. Oper. Res. 63:207-21.
DOI: https://doi.org/10.1016/0377-2217(92)90026-6
Offiong A. 2013. Development of Vehicle Replacement Programme for a Road Transport Company. Int. J. Appl. Sci. Tech. 3:31-5.
Pagare V. 2019. Appraisal of Optimum Economic Life for Farm Tractor: A Case Study. Econ. Aff. 64:111-8.
DOI: https://doi.org/10.30954/0424-2513.1.2019.15
Perrin R.K. 1972. Asset Replacement Principles. Am. J. Agr. Econ. 54:60-7.
DOI: https://doi.org/10.2307/1237734
Robb J.G., Smith J.A., Ellis D.E. 1998. Estimating Field Machinery Cost: A Whole Farm Approach. J. Nat. Resour. Life Sci. Educ. 27:25-9.
DOI: https://doi.org/10.2134/jnrlse.1998.0025
Shafiee M., Sørensen J.D. 2019. Maintenance optimization and inspection planning of wind energy assets: Models, methods and strategies. J. Reliab. Eng. Syst. Safe. 192.
DOI: https://doi.org/10.1016/j.ress.2017.10.025
Velmurugan R.S., Dhingra T. 2015. Maintenance strategy selection and its impact in maintenance function: A conceptual framework. Int. J. Oper Prod. Man. 35:1622-61.
DOI: https://doi.org/10.1108/IJOPM-01-2014-0028
How to Cite
Kolhe, K. P., Lemi, D. G. and Busse, S. K. (2024) “Studies of tractor maintenance and replacement strategies of Wonji Shoa Factory, Ethiopia”, Journal of Agricultural Engineering, 55(1). doi: 10.4081/jae.2024.1552.
Copyright (c) 2024 the Author(s)
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
PAGEPress has chosen to apply the Creative Commons Attribution NonCommercial 4.0 International License (CC BY-NC 4.0) to all manuscripts to be published.
Similar Articles
- Johnny Moretto, Emanuel Rigon, Luca Mao, Lorenzo Picco, Fabio Delai, Mario Aristide Lenzi, Medium- and short-term channel and island evolution in a disturbed gravel bed river (Brenta River, Italy) , Journal of Agricultural Engineering: Vol. 43 No. 4 (2012)
- Eva Audrey Yessito Houessou-Dossou, John Mwangi Gathenya, Mugwima Njuguna, Zachary Abiero Gariy, Andrea Petroselli, Comparative analysis of flood and rainfall frequency in the ungauged sub-watersheds of Kakia and Esamburumbur in Narok town, Kenya, using the EBA4SUB rainfall-runoff model , Journal of Agricultural Engineering: Vol. 53 No. 2 (2022)
- Roberto Romaniello, Antonietta Eliana Barrasso, Antonio Berardi, Claudio Perone, Antonia Tamborrino, Filippo Catalano, Antonietta Baiano, Hyperspectral imaging system to online monitoring the soy flour content in a functional pasta , Journal of Agricultural Engineering: Vol. 54 No. 4 (2023)
- Zhiqiang Song, Chuanxing Du, Yongcheng Chen, Dianlei Han, Xinzhong Wang, Development and test of a spring-finger roller-type hot pepper picking header , Journal of Agricultural Engineering: Vol. 55 No. 2 (2024)
- Maria Lucia V. de Chiara, Maria Luisa Amodio, Francesco Scura, Luigina Spremulli, Giancarlo Colelli, Design and preliminary test of a fluidised bed photoreactor for ethylene oxidation on mesoporous mixed SiO2/TiO2 nanocomposites under UV-A illumination , Journal of Agricultural Engineering: Vol. 45 No. 4 (2014)
- Alessandro Trevisani, Eleonora Iaccheri, Angelo Fabbri, Adriano Guarnieri, Pallet standards in agri-food sector: a brief survey , Journal of Agricultural Engineering: Vol. 45 No. 2 (2014)
- Andrea De Montis, Simone Caschili, Amedeo Ganciu, Antonio Ledda, Filippo Paoli, Federico Puddu, Mario Barra, Strategic environmental assessment implementation of transport and mobility plans. The case of Italian regions and provinces , Journal of Agricultural Engineering: Vol. 47 No. 2 (2016)
- José F. Reyes, Elías Contreras, Christian Correa, Pedro Melin, Image analysis of real-time classification of cherry fruit from colour features , Journal of Agricultural Engineering: Vol. 52 No. 4 (2021)
- Vidas Damanauskas, Algirdas Janulevičius, Effect of tillage implement (spring tine cultivator, disc harrow), soil texture, forward speed, and tillage depth on fuel consumption and tillage quality , Journal of Agricultural Engineering: Vol. 53 No. 3 (2022)
- Qinchao Xu, Shanjun Li, Haibing Pan, Qian Yang, Jian Zhang, Xuedong Lu, Cheng Shan, Design and operational parameters optimisation of a citrus substrate filling and transporting machine , Journal of Agricultural Engineering: Vol. 54 No. 3 (2023)
<< < 13 14 15 16 17 18 19 20 21 22 > >>
You may also start an advanced similarity search for this article.
