https://doi.org/10.4081/jae.2024.1552
Studies of tractor maintenance and replacement strategies of Wonji Shoa Factory, Ethiopia
Published: 23 January 2024
Abstract Views: 586
PDF: 198
HTML: 8
HTML: 8
Publisher's note
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
Authors
This study mainly focuses on tractor maintenance and replacement strategies to assess the impact of various parameters on the economic life of tractors in order to improve the value of a profitable management choice on selected tractor samples. Considering the preventive replacement policy, the total annual costs were estimated taking into account the repair and depreciation costs. At a 95% level of confidence for each approach, the statistical analysis program “IBM SPSS Statistics 26” was used. An empirical relation based on multiple regression analysis has been generated to predict the economic operational life of a tractor using per-unit repair cost and annual usage (hours). From the analysis, John Dear 333, SAME 130, New Holland 80, and Massy Ferguson 150 are not supposed to be used economically in the field after the fifth, seventh, sixth, and eighth years respectively at Wonji Shoa Sugar Factory due to increasing maintenance cost in present condition.
Abd Rani N.A., Baharum M.R., Akbar A.R.N., Nawawi A.H. 2015. Perception of Maintenance Management Strategy on Healthcare Facilities. Soc. Behav. Sci. 170:272-81.
DOI: https://doi.org/10.1016/j.sbspro.2015.01.037
Ajibade A.D., Odusina M.T., Rafiu A.A., Ayarinde A.W., Adeleke B.S., Babarinde S.N. 2014. The use of replacement model to determine the appropriate time to replace a deteriorating industrial equipment. IOSR J. Math. 10:9-13.
DOI: https://doi.org/10.9790/5728-10210913
Amiens E.O., Oisamoje M.D., Inegbenebor A.U. 2015. A Dynamic Programming Approach to Replacement of Transport Vehicles in Benin City, Nigeria. Br. J. Math. Comput. Sci. 6:204-14.
DOI: https://doi.org/10.9734/BJMCS/2015/15454
ASAE D497. 2000. Agricultural Machinery Management Data. Science. 85:350-7.
Bati Fedi G., Dereje Asefa F., Tafa Waktole A. 2022. Farm households’ perception about sugarcane out-growers scheme: Empirical evidence around Wonji/Shoa Sugar Factory. Cogent. Econ. Financ. Taylors Fransis J. 10:200.
DOI: https://doi.org/10.1080/23322039.2021.2009664
Calcante A., Fontanini L., Mazzetto F. 2013. Repair and maintenance costs of 4WD tractors and self-propelled combine harvesters in Italy. J. Agric. Eng. 4:10-5.
DOI: https://doi.org/10.4081/jae.2013.s2.e70
Cunha M, Gonçalves S.G. MACHoice: 2019. A decision support system for agricultural machinery management. Open Agric. 4:305-21.
DOI: https://doi.org/10.1515/opag-2019-0029
Dohi T., Ashioka A., Kaio N., Osaki S. 2006 Statistical estimation algorithms for repairs-time limit replacement scheduling under-earning rate criteria. Comput. Math. Appl. 51:345-56.
DOI: https://doi.org/10.1016/j.camwa.2005.11.004
Edwards W. 2019. Replacement strategies for farm machinery. Iowa State Uni. Ext. Outreach. pp 1-7.
Eilon S., King J.R., Hutchinson D.E. 1966. A Study in Equipment Replacement. J. Oper. Res. Soc. 17:59-71.
DOI: https://doi.org/10.1057/jors.1966.7
FAO. 2010. Agricultural mechanization in Mali and Ghana: strategies, experiences, and lessons for sustained impacts. Available from: https://www.fao.org/sustainable-agriculturalmechanization/resources/publications/details/fr/c/456121/
Kolhe K.P., Datta C.K. 2007. Prediction of Microstructure and Mechanical Properties of Multipass SAW. J. Mater. Process Tech. 197:241-9.
DOI: https://doi.org/10.1016/j.jmatprotec.2007.06.066
Kolhe K.P., Jadhav B.B. 2011. Testing and Performance Evaluation of Tractor Mounted Hydraulic Elevator for Mango Orchard. Am. J. Eng. Appl. Sci. 4:179-86.
DOI: https://doi.org/10.3844/ajeassp.2011.179.186
Kolhe K.P. 2014. Testing and ergonomically evaluation of tractor mounted. and self propelled coconut climber. Int. J. Eng. Technol. 3:357-62.
DOI: https://doi.org/10.15623/ijret.2014.0309057
Kolhe K.P. 2015. Stability analysis of tractor mounted hydraulic elevator for horticultural orchards. World J. Eng. 12:479-88.
DOI: https://doi.org/10.1260/1708-5284.12.5.479
Mbata J. 2012. Agribusiness indicators: Ethiopia. Tech. Rep. Agric. Rural Dev. RN:68237-E.
Mikler J. 2011. Life cycle costing used for justifying transition to predictive maintenance strategies. J. Mach. Eng. 11:49-58.
Nair S.K, Hopp W.J. 1992. A model for equipment replacement due to technological obsolescence. Eur. J. Oper. Res. 63:207-21.
DOI: https://doi.org/10.1016/0377-2217(92)90026-6
Offiong A. 2013. Development of Vehicle Replacement Programme for a Road Transport Company. Int. J. Appl. Sci. Tech. 3:31-5.
Pagare V. 2019. Appraisal of Optimum Economic Life for Farm Tractor: A Case Study. Econ. Aff. 64:111-8.
DOI: https://doi.org/10.30954/0424-2513.1.2019.15
Perrin R.K. 1972. Asset Replacement Principles. Am. J. Agr. Econ. 54:60-7.
DOI: https://doi.org/10.2307/1237734
Robb J.G., Smith J.A., Ellis D.E. 1998. Estimating Field Machinery Cost: A Whole Farm Approach. J. Nat. Resour. Life Sci. Educ. 27:25-9.
DOI: https://doi.org/10.2134/jnrlse.1998.0025
Shafiee M., Sørensen J.D. 2019. Maintenance optimization and inspection planning of wind energy assets: Models, methods and strategies. J. Reliab. Eng. Syst. Safe. 192.
DOI: https://doi.org/10.1016/j.ress.2017.10.025
Velmurugan R.S., Dhingra T. 2015. Maintenance strategy selection and its impact in maintenance function: A conceptual framework. Int. J. Oper Prod. Man. 35:1622-61.
DOI: https://doi.org/10.1108/IJOPM-01-2014-0028
How to Cite
Kolhe, K. P., Lemi, D. G. and Busse, S. K. (2024) “Studies of tractor maintenance and replacement strategies of Wonji Shoa Factory, Ethiopia”, Journal of Agricultural Engineering, 55(1). doi: 10.4081/jae.2024.1552.
Copyright (c) 2024 the Author(s)
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
PAGEPress has chosen to apply the Creative Commons Attribution NonCommercial 4.0 International License (CC BY-NC 4.0) to all manuscripts to be published.
Similar Articles
- Daniel Veal, Lutz Damerow, Peter Schulze Lammers, Michael Blanke, Kinematic model for mechanical apple blossom thinning , Journal of Agricultural Engineering: Vol. 55 No. 1 (2024)
- Diwei Wu, Shaohua Zeng, Shuai Wang, Yanan Chen, Yidan Xu, Zanthoxylum infructescence detection based on adaptive density clustering , Journal of Agricultural Engineering: Vol. 55 No. 2 (2024)
- Ileana Blanco, Simone Pascuzzi, Alexandros Sotirios Anifantis, Giacomo Scarascia-Mugnozza, Study of a pilot photovoltaic-electrolyser-fuel cell power system for a geothermal heat pump heated greenhouse and evaluation of the electrolyser efficiency and operational mode , Journal of Agricultural Engineering: Vol. 45 No. 3 (2014)
- Najmun Nahar, Alex Otieno Owino, Sayful Kabir Khan, Zakaria Hossain, Noma Tamaki, Effects of controlled burn rice husk ash on geotechnical properties of the soil , Journal of Agricultural Engineering: Vol. 52 No. 4 (2021)
- A. Restuccia, S. Failla, D. Longo, L. Caruso, I. Mallia, G. Schillaci, Assessment of energy return on energy investment (EROEI) of oil bearing crops for renewable fuel production , Journal of Agricultural Engineering: Vol. 44 No. s2 (2013): Proceedings of the 10th Conference of the Italian Society of Agricultural Engineering
- P. D'Antonio, C. D'Antonio, C. Evangelista, V. Doddato, The assessment of the sawmill noise , Journal of Agricultural Engineering: Vol. 44 No. s2 (2013): Proceedings of the 10th Conference of the Italian Society of Agricultural Engineering
- Hyun Seok Song, Kyung Seok Sim, Tae Won Park, Optimal tread design for agricultural lug tires determined through failure analysis , Journal of Agricultural Engineering: Vol. 49 No. 1 (2018)
- R. Gubiani, G. Pergher, S.R.S. Cividino, R. Lombardo, F. Blanchini, A Wii-controlled safety device for electric chainsaws , Journal of Agricultural Engineering: Vol. 44 No. s2 (2013): Proceedings of the 10th Conference of the Italian Society of Agricultural Engineering
- José Luis Morales-Reyes, Héctor-Gabriel Acosta-Mesa, Elia-Nora Aquino-Bolaños, Socorro Herrera Meza, Aldo Márquez Grajales, Anthocyanins estimation in homogeneous bean landrace (Phaseolus vulgaris L.) using probabilistic representation and convolutional neural networks , Journal of Agricultural Engineering: Vol. 54 No. 2 (2023)
- Daniele Torreggiani, Alberto Barbaresi, Francesca Dallacasa, Patrizia Tassinari, Effects of different architectural solutions on the thermal behaviour in an unconditioned rural building. The case of an Italian winery , Journal of Agricultural Engineering: Vol. 49 No. 1 (2018)
<< < 20 21 22 23 24 25 26 27 28 29 > >>
You may also start an advanced similarity search for this article.
