https://doi.org/10.4081/jae.2024.1562
Development and test of a spring-finger roller-type hot pepper picking header
Published: 19 February 2024
Abstract Views: 376
PDF: 253
HTML: 2
HTML: 2
Publisher's note
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
Authors
This study developed a spring-finger roller-type hot pepper picking header to increase picking efficiency, performance, and lower harvesting costs. The picking header was mainly composed of a roller, spring-fingers, a steel frame, an upper cover plate, and transmission parts. Based on SolidWorks, a picking structure model for hot peppers was created in accordance with their mechanical properties. The movement law of the picking springfinger was analyzed based on the working principle to select appropriate motion parameters of main factors. Based on these chosen parameters, a prototype hot pepper picking header was created, and field tests were conducted to investigate the primary factors influencing the harvesting effect. The rotation speed of the roller and the travel speed of the picking machine were monitored by setting sensors. Using Design Expert, the test results were examined and optimized in accordance with a central composite design. The orthogonal test results showed that when the roller rotation speed was 215.00 r⋅min−1, and travel speed was 3.59 km⋅h−1, the hot pepper picking header had the best harvest effect. The picking rate was 98.47%, and the breakage rate was 3.87%. The hot pepper picking header with a spring-finger roller type and good picking effect were demonstrated by the field experiment.
Food and Agriculture Organization-World Health Organization (FAOWHO), 2022. Production Share of Chilies and Peppers, Dry by Region. Available online: https://www.fao.org/faostat/en/#data/QCL/visualize (accessed on 08 July 2022).
Statistics Korea, 2022. Production of Chili Pepper. Available online:http://kostat.go.kr/portal/eng/pressReleases/1/index.board? bmode=read&aSeq=415243 (accessed on 12 July 2022).
Wang R , Zheng Z , Lu X , et al. 2021, Design, simulation and test of roller comb type Chrysanthemum (Dendranthema morifolium Ramat) picking machine[J]. Computers and Electronics in Agriculture, 187(1):106295.
DOI: https://doi.org/10.1016/j.compag.2021.106295
Dai, X., & Liu, Z.. 2005. On current situation and its development trends of the pepper industry in China. Journal of China Capsicum. vol. 4, pp. 1-6.
Bidhan Chandra NathYo-Sang NamMd. Durrul HudaMd. Mizanur RahmanPanna AliSubrata Paul. 2017. Status and constrain for mechanization of rice harvesting system in bangladesh. Agricultural Science (English), 8(6), 492-506.
DOI: https://doi.org/10.4236/as.2017.86037
Hu S. J., 2012.Design and research of the comb -type picking device for chili pepper. Shi Hezi University, Xin Jiang.
Chen, Y.C.; Kong, L.J.; Wang, H.X., 2013. Research of mechanism and experiment of 4LZ-3.0 self-propelled pepper harvester. Appl. Mech. Mater. 419, 217–222.
DOI: https://doi.org/10.4028/www.scientific.net/AMM.419.217
Funk, P.A.; Walker, S.J., 2010. Evaluation of five green chili cultivars utilizing five different harvest mechanisms. Appl. Eng. Agric. 26, 955–964.
DOI: https://doi.org/10.13031/2013.35906
Funk P A, Herbon R P. 2011. A Systems Approach to Chile Harvest Mechanization[J]. International Journal of Vegetable Science, 17(3):296-309.
DOI: https://doi.org/10.1080/19315260.2010.549167
Wall, M. M., Walker, S., Wall, A. D., 2003). Yield and quality of machine harvested red chili peppers. American Society for Horticultural Science (2), 1-5.
DOI: https://doi.org/10.21273/HORTTECH.13.2.0296
Stanly N. M., Jayan P. R., Malkani P., et al., 2020, Design, development and evaluation of pepper harvester. J. Agri Search. 7, 82–85.
Kang, K.S., Park, H.S., Park, S.J., 2016. Study on optimal working conditions for picking head of self-Propelled pepper harvester by factorial test. J. Biosyst. Eng. 41, 12–20.
DOI: https://doi.org/10.5307/JBE.2016.41.1.012
Kim, T.H., Kim, D.C.; Cho, Y., 2020. Performance comparison and evaluation of two small chili pepper harvester prototypes that attach to walking cultivators. Appl. Sci., 10, 2570.
DOI: https://doi.org/10.3390/app10072570
Nam, J.S., Byun, J.H., Kim, T.H., et al. 2018, Measurement of mechanical and physical properties of pepper for particle behavior analysis. J. Biosyst. Eng. 43, 173–184.Nam, J.S., Kang, Y.S., Kim, S.B., Factorial experiment for drum-type secondary separating part of self-propelled pepper harvester. J. Biosyst. Eng. 2017, 42, 242–250.
Shin, S.Y., Kim, M.H., Cho, Y. et al., 2021. Performance testing and evaluation of drum-type stem separation device for pepper harvester. Appl. Sci. 11, 9225.
DOI: https://doi.org/10.3390/app11199225
Qin, X., Lei, J., Chen, Y., 2012. Design and research on key components of a novel self-propelled chile pepper harvester. Appl. Mech. Mater. 468, 794–797.
DOI: https://doi.org/10.4028/www.scientific.net/AMR.468-471.794
Lei, J., Qin, X., Chen, Y. 2015, Design and analysis on key components of a novel chili pepper harvester’s picking device. Open Mech. Eng. J. 9, 540–545.
DOI: https://doi.org/10.2174/1874155X01509010540
Duan Y., 2014. Damage mechanism and experimental study of mechanical harvesting peppers. Shi Hezi University, Xin Jiang. 10-50.
Srikanth V., Rajesh G. K., Kothakota A., et al. 2020, Modeling and optimization of developed cocoa beans extractor parameters using box behnken design and artificial neural network. Computers and Electronics in Agriculture, 177: 105715.
DOI: https://doi.org/10.1016/j.compag.2020.105715
Yu Z.Y., Yang K., Hu Z.C. et al., 2023, Parameter optimization and simulation analysis of floating root cutting mechanism for garlic harvester. Computers and Electronics in Agriculture. Volume 204, January 2023, 107521. https://doi.org/10.1016/j.compag.2022.107521
DOI: https://doi.org/10.1016/j.compag.2022.107521
How to Cite
Song, Z. (2024) “Development and test of a spring-finger roller-type hot pepper picking header”, Journal of Agricultural Engineering, 55(2). doi: 10.4081/jae.2024.1562.
Copyright (c) 2024 the Author(s)
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
PAGEPress has chosen to apply the Creative Commons Attribution NonCommercial 4.0 International License (CC BY-NC 4.0) to all manuscripts to be published.
Similar Articles
- Daniele Pochi, Roberto Fanigliulo, Mauro Pagano, Renato Grilli, Marco Fedrizzi, Laura Fornaciari, Dynamic-energetic balance of agricultural tractors: active systems for the measurement of the power requirements in static tests and under field conditions , Journal of Agricultural Engineering: Vol. 44 No. s2 (2013): Proceedings of the 10th Conference of the Italian Society of Agricultural Engineering
- Simone Pascuzzi, Ileana Blanco, Alexandros Sotirios Anifantis, Giacomo Scarascia-Mugnozza, Hazards assessment and technical actions due to the production of pressured hydrogen within a pilot photovoltaic-electrolyser-fuel cell power system for agricultural equipment , Journal of Agricultural Engineering: Vol. 47 No. 2 (2016)
- Angelo Fabbri, Chiara Cevoli, Giuseppe Cantalupo, A method for handlebars ballast calculation in order to reduce vibrations transmissibility in walk behind tractors , Journal of Agricultural Engineering: Vol. 48 No. 2 (2017)
- Luhua Han, Haorui Ma, Menghan Mo, Francis Kumi, Jianping Hu, Hanping Mao, Design and test of an efficient seedling pick-up device with a combination of air jet ejection and mechanical action , Journal of Agricultural Engineering: Vol. 55 No. 3 (2024)
- Qazeem Opeyemi Ogunlowo, Adedayo Afeez Azeez, Wook Ho Na, Anis Rabiu, Misbaudeen Aderemi Adesanya, Ezatullah Zakir, John Ademola Ijadunola, Bukola Olanrewaju Afolabi, Babajide Saheed Kosemani, Titus Adeyinka Ilori, Hyun-Woo Lee, Analysis of microclimate temperature and relative humidity distribution of local poultry house in a subtropical area of Nigeria , Journal of Agricultural Engineering: Vol. 55 No. 2 (2024)
- Daniela Lovarelli, Elisabetta Riva, Gabriele Mattachini, Marcella Guarino, Giorgio Provolo, Assessing the effect of barns structures and environmental conditions in dairy cattle farms monitored in Northern Italy , Journal of Agricultural Engineering: Vol. 52 No. 4 (2021)
- Francesca Piazzolla, Maria Luisa Amodio, Giancarlo Colelli, The use of hyperspectral imaging in the visible and near infrared region to discriminate between table grapes harvested at different times , Journal of Agricultural Engineering: Vol. 44 No. 2 (2013)
- Andrea Casson, Valentina Giovenzana, Alessio Tugnolo, Alessia Pampuri, Ilaria Fiorindo, Roberto Beghi, Riccardo Guidetti, Assessment of an expanded-polypropylene isothermal box to improve logistic sustainability of catering services , Journal of Agricultural Engineering: Vol. 52 No. 2 (2021)
- Francesco Giuseppe Carollo, Vito Ferro, Vincenzo Pampalone, Sequent depth ratio of B-jumps on smooth and rough beds , Journal of Agricultural Engineering: Vol. 44 No. 2 (2013)
- Yun Zhu, Shuwen Liu, Xiaojun Wu, Lianfeng Gao, Youyun Xu, Multi-class segmentation of navel orange surface defects based on improved DeepLabv3+ , Journal of Agricultural Engineering: Vol. 55 No. 2 (2024)
<< < 10 11 12 13 14 15 16 17 18 19 > >>
You may also start an advanced similarity search for this article.
