https://doi.org/10.4081/jae.2024.1562
Development and test of a spring-finger roller-type hot pepper picking header
Published: 19 February 2024
Abstract Views: 376
PDF: 253
HTML: 2
HTML: 2
Publisher's note
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
Authors
This study developed a spring-finger roller-type hot pepper picking header to increase picking efficiency, performance, and lower harvesting costs. The picking header was mainly composed of a roller, spring-fingers, a steel frame, an upper cover plate, and transmission parts. Based on SolidWorks, a picking structure model for hot peppers was created in accordance with their mechanical properties. The movement law of the picking springfinger was analyzed based on the working principle to select appropriate motion parameters of main factors. Based on these chosen parameters, a prototype hot pepper picking header was created, and field tests were conducted to investigate the primary factors influencing the harvesting effect. The rotation speed of the roller and the travel speed of the picking machine were monitored by setting sensors. Using Design Expert, the test results were examined and optimized in accordance with a central composite design. The orthogonal test results showed that when the roller rotation speed was 215.00 r⋅min−1, and travel speed was 3.59 km⋅h−1, the hot pepper picking header had the best harvest effect. The picking rate was 98.47%, and the breakage rate was 3.87%. The hot pepper picking header with a spring-finger roller type and good picking effect were demonstrated by the field experiment.
Food and Agriculture Organization-World Health Organization (FAOWHO), 2022. Production Share of Chilies and Peppers, Dry by Region. Available online: https://www.fao.org/faostat/en/#data/QCL/visualize (accessed on 08 July 2022).
Statistics Korea, 2022. Production of Chili Pepper. Available online:http://kostat.go.kr/portal/eng/pressReleases/1/index.board? bmode=read&aSeq=415243 (accessed on 12 July 2022).
Wang R , Zheng Z , Lu X , et al. 2021, Design, simulation and test of roller comb type Chrysanthemum (Dendranthema morifolium Ramat) picking machine[J]. Computers and Electronics in Agriculture, 187(1):106295.
DOI: https://doi.org/10.1016/j.compag.2021.106295
Dai, X., & Liu, Z.. 2005. On current situation and its development trends of the pepper industry in China. Journal of China Capsicum. vol. 4, pp. 1-6.
Bidhan Chandra NathYo-Sang NamMd. Durrul HudaMd. Mizanur RahmanPanna AliSubrata Paul. 2017. Status and constrain for mechanization of rice harvesting system in bangladesh. Agricultural Science (English), 8(6), 492-506.
DOI: https://doi.org/10.4236/as.2017.86037
Hu S. J., 2012.Design and research of the comb -type picking device for chili pepper. Shi Hezi University, Xin Jiang.
Chen, Y.C.; Kong, L.J.; Wang, H.X., 2013. Research of mechanism and experiment of 4LZ-3.0 self-propelled pepper harvester. Appl. Mech. Mater. 419, 217–222.
DOI: https://doi.org/10.4028/www.scientific.net/AMM.419.217
Funk, P.A.; Walker, S.J., 2010. Evaluation of five green chili cultivars utilizing five different harvest mechanisms. Appl. Eng. Agric. 26, 955–964.
DOI: https://doi.org/10.13031/2013.35906
Funk P A, Herbon R P. 2011. A Systems Approach to Chile Harvest Mechanization[J]. International Journal of Vegetable Science, 17(3):296-309.
DOI: https://doi.org/10.1080/19315260.2010.549167
Wall, M. M., Walker, S., Wall, A. D., 2003). Yield and quality of machine harvested red chili peppers. American Society for Horticultural Science (2), 1-5.
DOI: https://doi.org/10.21273/HORTTECH.13.2.0296
Stanly N. M., Jayan P. R., Malkani P., et al., 2020, Design, development and evaluation of pepper harvester. J. Agri Search. 7, 82–85.
Kang, K.S., Park, H.S., Park, S.J., 2016. Study on optimal working conditions for picking head of self-Propelled pepper harvester by factorial test. J. Biosyst. Eng. 41, 12–20.
DOI: https://doi.org/10.5307/JBE.2016.41.1.012
Kim, T.H., Kim, D.C.; Cho, Y., 2020. Performance comparison and evaluation of two small chili pepper harvester prototypes that attach to walking cultivators. Appl. Sci., 10, 2570.
DOI: https://doi.org/10.3390/app10072570
Nam, J.S., Byun, J.H., Kim, T.H., et al. 2018, Measurement of mechanical and physical properties of pepper for particle behavior analysis. J. Biosyst. Eng. 43, 173–184.Nam, J.S., Kang, Y.S., Kim, S.B., Factorial experiment for drum-type secondary separating part of self-propelled pepper harvester. J. Biosyst. Eng. 2017, 42, 242–250.
Shin, S.Y., Kim, M.H., Cho, Y. et al., 2021. Performance testing and evaluation of drum-type stem separation device for pepper harvester. Appl. Sci. 11, 9225.
DOI: https://doi.org/10.3390/app11199225
Qin, X., Lei, J., Chen, Y., 2012. Design and research on key components of a novel self-propelled chile pepper harvester. Appl. Mech. Mater. 468, 794–797.
DOI: https://doi.org/10.4028/www.scientific.net/AMR.468-471.794
Lei, J., Qin, X., Chen, Y. 2015, Design and analysis on key components of a novel chili pepper harvester’s picking device. Open Mech. Eng. J. 9, 540–545.
DOI: https://doi.org/10.2174/1874155X01509010540
Duan Y., 2014. Damage mechanism and experimental study of mechanical harvesting peppers. Shi Hezi University, Xin Jiang. 10-50.
Srikanth V., Rajesh G. K., Kothakota A., et al. 2020, Modeling and optimization of developed cocoa beans extractor parameters using box behnken design and artificial neural network. Computers and Electronics in Agriculture, 177: 105715.
DOI: https://doi.org/10.1016/j.compag.2020.105715
Yu Z.Y., Yang K., Hu Z.C. et al., 2023, Parameter optimization and simulation analysis of floating root cutting mechanism for garlic harvester. Computers and Electronics in Agriculture. Volume 204, January 2023, 107521. https://doi.org/10.1016/j.compag.2022.107521
DOI: https://doi.org/10.1016/j.compag.2022.107521
How to Cite
Song, Z. (2024) “Development and test of a spring-finger roller-type hot pepper picking header”, Journal of Agricultural Engineering, 55(2). doi: 10.4081/jae.2024.1562.
Copyright (c) 2024 the Author(s)
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
PAGEPress has chosen to apply the Creative Commons Attribution NonCommercial 4.0 International License (CC BY-NC 4.0) to all manuscripts to be published.
Similar Articles
- L. Pari, A. Assirelli, A. Suardi, V. Civitarese, A. Del Giudice, E. Santangelo, Seed losses during the harvesting of oilseed rape (Brassica napus L.) at on-farm scale , Journal of Agricultural Engineering: Vol. 44 No. s2 (2013): Proceedings of the 10th Conference of the Italian Society of Agricultural Engineering
- Giovanni Francesco Ricci, Faouzi Zahi, Ersilia D'Ambrosio, Anna Maria De Girolamo, Giuseppe Parete, Taha-Hocine Debieche, Francesco Gentile, Evaluating flow regime alterations due to point sources in intermittent rivers: A modelling approach , Journal of Agricultural Engineering: Vol. 53 No. 2 (2022)
- Luigi Cavazza, Adriano Guarnieri, Angelo Fabbri, Chiara Cevoli, Giovanni Molari, Theoretical and experimental study on mechanical characterisation of a water drop impact on a solid surface , Journal of Agricultural Engineering: Vol. 47 No. 1 (2016)
- Yevgeny Beiderman, Mark Kunin, Eli Kolberg, Ilan Halachmi, Binyamin Abramov, Rafael Amsalem, Zeev Zalevsky, Automatic solution for detection, identification and biomedical monitoring of a cow using remote sensing for optimised treatment of cattle , Journal of Agricultural Engineering: Vol. 45 No. 4 (2014)
- Carlos Alejandro Perez Garcia, Marco Bovo, Daniele Torreggiani, Patrizia Tassinari, Stefano Benni, 3D numerical modelling of temperature and humidity index distribution in livestock structures: a cattle-barn case study , Journal of Agricultural Engineering: Vol. 54 No. 3 (2023)
- Francesca Perazzolo, Gabriele Mattachini, Fulvia Tambone, Aldo Calcante, Giorgio Provolo, Nutrient losses from cattle co-digestate slurry during storage , Journal of Agricultural Engineering: Vol. 47 No. 2 (2016)
- Sara Cucchiaro, Laura Carretta, Paolo Nasta, Federico Cazorzi, Roberta Masin, Nunzio Romano, Paolo Tarolli, Multi-temporal geomorphometric analysis to assess soil erosion under different tillage practices: A methodological case study , Journal of Agricultural Engineering: Vol. 53 No. 1 (2022)
- Ileana Blanco, Simone Pascuzzi, Alexandros Sotirios Anifantis, Giacomo Scarascia-Mugnozza, Study of a pilot photovoltaic-electrolyser-fuel cell power system for a geothermal heat pump heated greenhouse and evaluation of the electrolyser efficiency and operational mode , Journal of Agricultural Engineering: Vol. 45 No. 3 (2014)
- Roberto Beghi, Valentina Giovenzana, Raffaele Civelli, Enrico Cini, Riccardo Guidetti, Characterisation of olive fruit for the milling process by using visible/near infrared spectroscopy , Journal of Agricultural Engineering: Vol. 44 No. 2 (2013)
- Adeshina Fadeyibi, Zinash D. Osunde, Evans C. Egwim, Peter A. Idah, Performance evaluation of cassava starch-zinc nanocomposite film for tomatoes packaging , Journal of Agricultural Engineering: Vol. 48 No. 3 (2017)
<< < 19 20 21 22 23 24 25 26 27 28 > >>
You may also start an advanced similarity search for this article.
