https://doi.org/10.4081/jae.2024.1566
Development and field testing of biodegradable seedling plug-tray cutting mechanism for automated vegetable transplanter
Published: 22 March 2024
Abstract Views: 634
PDF: 206
HTML: 10
HTML: 10
Publisher's note
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
Authors
Transplanting seedlings from plug trays into the field can cause transplant shock and lower the seedling survival rate. In order to avoid the need for a complicated clamping mechanism, this study developed a biodegradable seedling plug-tray cutting mechanism (SPCM) that separates seedlings with plug cells from plug trays. In order to cut and separate the plug cell from the plug tray and enable the seedling to fall into the transplanting hopper, the three sub-mechanisms that make up the SPCM align the plug cell at the point of seedling discharge. Approximately 82% of the plug cell was separated by the SPCM before being delivered to the planting unit. Additionally, using pepper and cabbage seedlings, the SPCM-equipped transplanter achieved a 74% transplanting performance, with an average field efficiency of 68%, a field capacity of 0.032-0.035 ha h-1, and a labor requirement that was 73% lower than that of manual seedling transplanting. The majority of pepper seedlings (85%) were transplanted with a planting angle of less than 10°, and 7% of cabbage seedlings were inclined with a planting depth of 48 mm for pepper and 53 mm for cabbage. These transplanting results were considered satisfactory. In conclusion, the SPCM represents a step toward effective and sustainable vegetable seedling transplanting. Enhancing productivity, precision in planting, and sustainability offer stimulating prospects for additional study and advancement in the area.
Basak, J.K., Qasim, W., Okyere, F.G., Khan, F., Lee, Y.J., Park, J., Kim, H.T. 2019. Regression analysis to estimate morphology parameters of pepper plant in a controlled greenhouse system. J. Biosyst. Eng. 44:57-68.
Bingliang, Y.E., Tao, T., Gaohong, Y.U., Weiming, Y.I., Guofeng, Z. 2019. Dynamic analysis of rotary seedling pick-up mechanism of vegetable transplanting machine with counterweight. Nongye Jixie Xuebao/Transact. Chin. Soc. Agric. Mach. vol. 50.
Chen, K.J., Marsh, T.L., Tozer, P.R., Galinato, S.P. 2019. Biotechnology to sustainability: consumer preferences for food products grown on biodegradable mulches. Food Res. Int. 116:200-10.
Choi, S., Xu, L., Kim, H.J. 2019. Influence of physical properties of peat-based potting mixes substituted with parboiled rice hulls on plant growth under two irrigation regimes. Hortic. Environ. Biotechnol. 60:895-911.
Choi, W.C., Kim, D.C., Ryu, I.H., Kim, K.U. 2002. Development of a seedling pick-up device for vegetable transplanters. Trans. ASAE 45.
Evans, M.R., Hensley, D.L. 2004. Plant growth in plastic, peat, and processed poultry feather fiber growing containers. Hort Science 39:1012-4.
Evans, M.R., Karcher, D., 2004. Properties of plastic, peat, and processed poultry feather fiber growing containers. Hort Science 39:1008-11.
Filho, W.L., Salvia, A.L., Bonoli, A., Saari, U.A., Voronova, V., Klõga, M., Kumbhar, S.S., Olszewski, K., De Quevedo, D.M., Barbir, J. 2021. An assessment of attitudes towards plastics and bioplastics in Europe. Sci. Total Environ. 755:142732.
Fuentes, R.A., Berthe, J.A., Barbosa, S.E., Castillo, L.A. 2021. Development of biodegradable pots from different agroindustrial wastes and byproducts. Sustain. Mater. Technol. 30:e00338.
Gutiérrez, C., Serwatowski, R., Gracia, C., Cabrera, J.M., Saldaña, N. 2009. Design, building and testing of a transplanting mechanism for strawberry plants of bare root on mulched soil. Span. J. Agric. Res. 7:791.
Han, L., Mao, H., Hu, J., Kumi, F. 2019. Development of a riding-type fully automatic transplanter for vegetable plug seedlings. Span. J. Agric. Res. 17:e0205.
Iqbal, M.Z., Islam, M.N., Chowdhury, M., Islam, S., Park, T., Kim, Y.J., Chung, S.O. 2021. Working speed analysis of the gear-driven dibbling mechanism of a 2.6 kW walking-type automatic pepper transplanter. Machines 9:6.
Jang, D., Kwon, Y., Choi, K., Kim, I.S., 2018. Comparison of growth characteristics fruit vegetable seedlings grown on cylindrical paper pot trays of plug trays. Prot. Hortic. Plant Fact. 27:381-90.
Javidan, S.M., Mohammadzamani, D. 2019. Design, construction and evaluation of semi-automatic vegetable transplanter with conical distributor cup. SN Appl. Sci. 1:999.
Jin, X., Li, D., Ma, H., Ji, J., Zhao, K., Pang, J. 2018. Development of single row automatic transplanting device for potted vegetable seedlings. Int. J. Agric. Biol. Eng. 11:67-75.
Jo, J.S., Okyere, F.G., Jo, J.M., Kim, H.T. 2018. A study on improving the performance of the planting device of a vegetable transplanter. J. Biosyst. Eng. 43:202-10.
Jorg, O.J., Sportelli, M., Fontanelli, M., Frasconi, C., Raffaelli, M., Fantoni, G. 2021. Design, development and testing of feeding grippers for vegetable plug transplanters. AgriEngineering 3:669-80.
Khadatkar, A., Mathur, S.M. 2022. Design and development of an automatic vegetable transplanter using a novel rotating finger device with push-type mechanism for plug seedlings. Int. J. Veg. Sci. 28:121-31.
Khadatkar, A., Mathur, S.M., Gaikwad, B.B., 2018. Automation in transplanting:a smart way of vegetable cultivation. Curr. Sci. 115:1884.
Khan, A.A., Mahmood, T., Bano, B. 2000. Development of biodecomposable (jiffy) pots for raising and transplanting nursery plants. Int. J. Agric. Biol. 2:380-1.
Kumar, G.V.P., Raheman, H. 2008. Vegetable transplanters for use in developing countries - a review. Int. J. Veg. Sci. 14:232-55.
Kumar, G.V.P., Raheman, H. 2011. Development of a walk-behind type hand tractor powered vegetable transplanter for paper pot seedlings. Biosyst. Eng. 110:189-97.
Kumar, G.V.P., Raheman, H. 2012. Automatic feeding mechanism of a vegetable transplanter. Int. J. Agric. Biol. Eng. 5:1-8.
Liu, D., Gong, Y., Zhang, X., Chen, X., Wang, G., Zhang, X. 2022. Design and experiment of dry-farming cantaloupe transplanter under water. Agriculture 12:796.
Marr, C.W., Jirak, M. 1990. Holding tomato transplants in plug trays. HortScience 25:173-6.
Muriuki, J.K., Kuria, A.W., Muthuri, C.W., Mukuralinda, A., Simons, A.J., Jamnadass, R.H. 2014. Testing biodegradable seedling containers as an alternative for polythene tubes in tropical small-scale tree nurseries. Small-scale For. 13:127-42.
Ni, Y., Jin, C., Liu, J. 2015. Design and experiment of system for picking up and delivering seedlings in automatic transplanter. Trans. Chinese Soc. Agric. Eng. 31:10-9.
Parish, R.L. 2005. Current developments in seeders and transplanters for vegetable crops. Horttechnology 15:346-51.
Park, S.H., Kim, J.Y., Choi, D.K., Kim, C.K., Kwak, T.Y., Cho, S.C. 2005. Development of walking type chinese cabbage transplanter. J. Biosyst. Eng. 30:81-8.
Paudel, B., Basak, J.K., Kaushalya Madhavi, B.G., Kim, N.E., Lee, G.-H., Choi, G.-M., Choi, Y.W., Kim, H.T. 2022. Properties of paper-based biodegradable pots for growing seedlings. Hortic. Environ. Biotechnol. 63:793-807.
Shao, Y., Han, X., Xuan, G., Liu, Y., Gao, C., Wang, G., Hu, Z. 2021. Development of a multi-adaptive feeding device for automated plug seedling transplanter. Int. J. Agric. Biol. Eng. 14:91-6.
Sharma, A., Khar, S., 2022. Current developments in vegetable transplanters in developing countries: a comprehensive review. Int. J. Veg. Sci. 28:417-40.
Tian, Z., Ma, W., Yang, Q., Yao, S., Guo, X., Duan, F., 2022. Design and experiment of gripper for greenhouse plug seedling transplanting based on EDM. Agronomy 12:1487.
Wen, Y., Zhang, J., Tian, J., Duan, D., Zhang, Y., Tan, Y., Yuan, T., Li, X. 2021. Design of a traction double-row fully automatic transplanter for vegetable plug seedlings. Comput. Electron. Agric. 182:106017.
Xin, J., Kaixuan, Z., Jiangtao, J., Hao, M., Jing, P., Zhaomei, Q. 2019. Design and experiment of automatic transplanting device for potted tomato seedlings. Proc. Inst. Mech. Eng. Part C J. Mech. Eng. Sci. 233:1045-54.
Yang, C., Fang, X., Yang, X., Wang, C., Liu, Z.J., Sun, X. 2013. Automatic delivery mechanism of potted-seedling for vegetable transplanter based on PLC. Trans. Chin. Soc. Agric. Mach. 44:19-23.
Yuan, T., Wang, D., Wen, Y.S., Zhu, S.S., Chen, Y., Tan, Y.Z. 2019. Design and experiment of seedlings unloading mechanism based on methods of air-blowing and vibration for vegetable transplanter. Trans. Chin. Soc. Agric. Mach. 50:80-7.
Zhang, X., Wang, C., Chen, Y. 2019. Properties of selected biodegradable seedling plug-trays. Sci. Hortic. 249:177-84.
How to Cite
Paudel, B. (2024) “Development and field testing of biodegradable seedling plug-tray cutting mechanism for automated vegetable transplanter”, Journal of Agricultural Engineering, 55(2). doi: 10.4081/jae.2024.1566.
Copyright (c) 2024 the Author(s)
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
PAGEPress has chosen to apply the Creative Commons Attribution NonCommercial 4.0 International License (CC BY-NC 4.0) to all manuscripts to be published.
Similar Articles
- Elio Dinuccio, Fabrizio Gioelli, Dalibor Cuk, Luca Rollè, Paolo Balsari, The use of co-digested solid fraction as feedstock for biogas plants , Journal of Agricultural Engineering: Vol. 44 No. 4 (2013)
- Federico Preti, Tommaso Letterio, Shallow landslide susceptibility assessment in a data-poor region of Guatemala (Comitancillo municipality) , Journal of Agricultural Engineering: Vol. 46 No. 3 (2015)
- Ileana Blanco, Evelia Schettini, Giacomo Scarascia Mugnozza, Giuliano Vox, Thermal behaviour of green façades in summer , Journal of Agricultural Engineering: Vol. 49 No. 3 (2018)
- Volodymyr Bulgakov, Volodymyr Nadykto, Semjons Ivanovs, Ilmars Dukulis, Improving the performance of a ploughing tractor by means of an auxiliary carriage with motorized axle , Journal of Agricultural Engineering: Vol. 52 No. 1 (2021)
- Francesco Barreca, Pasquale Praticò, Giuseppe Davide Cardinali, A low-energy storage container for food and agriculture products , Journal of Agricultural Engineering: Vol. 52 No. 3 (2021)
- Hongbo Wang, Zhicheng Xie, Yongzheng Yang, Junmao Li, Zilu Huang, Zhihong Yu, Fast identification of tomatoes in natural environments by improved YOLOv5s , Journal of Agricultural Engineering: Vol. 55 No. 3 (2024)
- Fabrizio Mazzetto, Aldo Calcante, Aira Mena, Pasqualina Sacco, TEST OF GROUND-SENSING DEVICES FOR MONITORING CANOPY VIGOUR AND DOWNY MILDEW PRESENCE IN VINEYARDS: FIRST QUALITATIVE RESULTS , Journal of Agricultural Engineering: Vol. 42 No. 2 (2011)
- Francesca Valenti, Simona M.C. Porto, Giovanni Cascone, Claudia Arcidiacono, Potential biogas production from agricultural by-products in Sicily. A case study of citrus pulp and olive pomace , Journal of Agricultural Engineering: Vol. 48 No. 4 (2017)
- Vincenzo Bagarello, Giuseppe Basile, Gaetano Caltabellotta, Giuseppe Giordano, Massimo Iovino, Testing soil water repellency in a Sicilian area two years after a fire , Journal of Agricultural Engineering: Vol. 51 No. 2 (2020)
- Angelo Sommella, Alessandro Santini, Gerardo Severino, Alessandro Comegna, BEHAVIOUR OF SALT DISTRIBUTION IN DRY SOILS , Journal of Agricultural Engineering: Vol. 38 No. 4 (2007)
<< < 33 34 35 36 37 38 39 > >>
You may also start an advanced similarity search for this article.
