https://doi.org/10.4081/jae.2024.1574 Development of high-speed and precision metering device with gradient-feeding and control seed for soybean planting
Published:16 April 2024
Abstract Views: 241
PDF: 230
Publisher's note
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
Authors
High-speed and precision planting was employed to improve the yields of soybean seeds. However, most mechanical seed metering devices had a lower quality index under high-speed. In this study, a high-speed and precision metering device with gradient-feeding (GF) and control-seed (CS) for soybean planting was designed to improve the quality index at high speeds. GF was designed to make soybean seeds rapidly enter seed cells. CS prevented soybean seed that was to be released from being cleared during the clearing stage. Firstly, the range of working parameters of it was determined by theoretical analysis, which included the angle of guiding-slope (α), the angle of seed-control (θ), and mutation height (∆H). Then, orthogonal center combination tests with three-factor and five-level were carried out to determine the corresponding quality index and miss index with different working parameters. The optimal working parameters were determined by regression equations between the quality index and the miss index. The high-speed and precision metering device with GF and CS was thus manufactured based on these optimal working parameters. The simulation test and bench test of it were carried out with different forward speeds of the planter. The results showed that the optimal angle of guiding-slope (α), angle of seed-control (θ), and mutation height (∆H) were 18.06°, 136.67°, and 2.77 mm, respectively. In the bench test, all quality indices were higher than 95.00%, and all miss indices were lower than 3.00% when the forward speed of the planter was 4 - 16 km/h. The results of the bench test were consistent with the results of the simulation test, with an average relative error of 2.33%. High-speed and precision metering device with gradient-feeding (GF) and control-seed (CS) can realize precision planting at high speeds.
Ahmadi E., Ghassemzadeh H. R., Moghaddam M., Kim K. U. 2008. Development of a precision seed drill for oilseed rape. Turk. J. Agric. For. 32:451-458.
Cay A., Kocabiyik H., May S. 2018. Development of an electro-mechanic control system for seed-metering unit of single seed corn planters part II: Field performance. Comput. Electron. Agric. 145:11-17. DOI: https://doi.org/10.1016/j.compag.2017.12.021
Chen Y., Jia H., Wang J., Wang Q., Hu B. 2017. Design and experiment of scoop metering device for soybean high-speed and precision seeder. Trans. Chin. Soc. Agric. Mach. 48:95-104.
Correia T. P. D. S., Sousa S. F. G. D., Silva P. R., Dias P. P., Gomes, A. R. A. 2016. Sowing performance by a metering mechanism of continuous flow in different slope conditions. Engenharia Agrícola. 36:839-845. DOI: https://doi.org/10.1590/1809-4430-Eng.Agric.v36n5p839-845/2016
Du R., Gong B., Liu N., Wang C., Yang Z., Ma M. 2013. A Design and experiment on intelligent fuzzy monitoring system for corn planters. Intl. J. Agric. Biol. Eng. 6:11-18.
Du X., Liu C., Jiang M., Zhang F., Yuan H., Yang H. 2019. Design and experiment of self-disturbance inner-filling cell wheel maize precision seed-metering device. Trans. CSAE. 35:23-34. [In Chinese].
Gao X., Zhou Z., Xu Y., Yu Y, Su Y., Cui T. 2020. Numerical simulation of particle motion characteristics in quantitative seed feeding system. Powder Technol. 367:643-658. DOI: https://doi.org/10.1016/j.powtec.2020.04.021
He S., Zang Y., Huang Z., Tao W., Xing H., Qin W., Jiang Y., Wang Z. 2022. Design of and experiment on a cleaning mechanism of the pneumatic single seed metering device for coated hybrid rice. Agric. 12:1239. DOI: https://doi.org/10.3390/agriculture12081239
Hu M., Xia J., Zheng K., Du J., Liu Z., Zhou M. 2021. Design and experiment of inside-filling pneumatic high speed precision seed-metering device for cotton. Trans. Chin. Soc. Agric. Mach. 52:73-85. [In Chinese].
Hu M., Xia J., Zhou M., Liu Z., Xie D. 2022. Design and experiment of seed-cleaning mechanism for inside-filling pneumatic cotton precision seed-metering device. Agric. 12:1217. DOI: https://doi.org/10.3390/agriculture12081217
Jia H., Chen Y, Zhao J., Guo M, Huang D, Zhuang J. 2018. Design and key parameter optimization of an agitated soybean seed metering device with horizontal seed filling. Intl. J. Agric. Biol. Eng. 11:76-87. DOI: https://doi.org/10.25165/j.ijabe.20181102.3464
Khatchatourian O. A., Binelo M. O., De Lima R. F. 2014. Simulation of soya bean flow in mixed-flow dryers using DEM. Biosyst. Eng. 123:68-76. DOI: https://doi.org/10.1016/j.biosystemseng.2014.05.003
Koller A., Wan Y., Miller E., Weckler P., Taylor R. 2014. Test method for precision seed singulation systems. Trans. ASABE. 57:1283-1290. DOI: https://doi.org/10.13031/trans.57.10466
Kostic M., Rakic D., Radomirovic D., Savin L., Dedovic N., Crnojevic V., Ljubicic N. 2018. Corn seeding process fault cause analysis based on a theoretical and experimental approach. Comput. Electron. Agric. 151:207-218. DOI: https://doi.org/10.1016/j.compag.2018.06.014
Li Y., Wei Y., Yang L., Zhang D., Cui T., Zhang K. 2020. Design and experiment of mung bean precision seed-metering device with disturbance for promoting seed filling. Trans. Chin. Soc. Agric. Mach. 51:43-53. [In Chinese].
Liu H., Guo L., Fu L., Tang S. 2015. Study on multi-size seed-metering device for vertical plate soybean precision planter. Intl. J. Agric. Biol. Eng. 8:1-8.
Ryu I. H., Kim K. U. 1998. Design of roller type metering device for precision planting. Trans. ASAE. 41:923-930. DOI: https://doi.org/10.13031/2013.17249
Sharaby N., Doroshenko A., Butovchenko A. 2022. Modelling and verification of sesame seed particles using the discrete element method. J. Agric. Eng. 53:1286. DOI: https://doi.org/10.4081/jae.2022.1286
Shen H., Zhang J., Chen X., Dong J., Huang Y., Shi J. 2021. Development of a guiding-groove precision metering device for high-speed planting of soybean. Trans. ASABE. 64:1113-1122. DOI: https://doi.org/10.13031/trans.14307
Wang J., Qi X., Xu C., Wang Z., Jiang Y., Tang H. 2021. Design evaluation and performance analysis of the inside-filling air-assisted high-speed precision maize seed-metering device. Sustainability. 13:5483. DOI: https://doi.org/10.3390/su13105483
Wang J., Tang H., Guan R., Li X., Bai H., Tian L. 2017. Optimization design and experiment on clamping static and dynamic finger-spoon maize precision seed metering device. Trans. Chin. Soc. Agric. Mach. 48:48-57. [In Chinese].
Wang W., Wu K., Zhang Y., Wang M., Zhang C., Chen L. 2022. The development of an electric-driven control system for a high-speed precision planter based on the double closed-loop fuzzy PID algorithm. Agronomy-Basel. 12:945. DOI: https://doi.org/10.3390/agronomy12040945
Wang W., Zhang S., Li J., Zhang P., Chen Y. 2022. Effects of the win-row planter with subsoiling on soybean growth and yield in northern China. J. Agric. Eng. 53: 1359. DOI: https://doi.org/10.4081/jae.2022.1359
Xing H., Zang Y., Wang M., Luo W., Zhang H., Fang Y. 2020. Design and experimental analysis of a stirring device for a pneumatic precision rice seed metering device. Trans. ASABE. 63:799-808. DOI: https://doi.org/10.13031/trans.13096
Xiong D., Wu M., Xie W., Liu R., Luo H. 2021. Design and experimental study of the general mechanical pneumatic combined seed metering device. Appl. Sci. 11:7223. DOI: https://doi.org/10.3390/app11167223
Xue P., Hao Y., Jiao W., Ren J., Huang Y. 2020. Design and test of a double-curved guiding groove for a high-speed precision seed-metering device. Trans. ASABE. 63:1349-1360. DOI: https://doi.org/10.13031/trans.13331
Xue P., Xia X., Gao P., Ren D., Hao Y., Zheng Z., Zhang J., Zhu R., Hu B., Huang Y. 2019. Double-setting seed-metering device for precision planting of soybean at high speeds. Trans. ASABE. 62:187-196. DOI: https://doi.org/10.13031/trans.13055
Yazgi A., Degirmencioglu A. 2007. Optimisation of the seed spacing uniformity performance of a vacuum-type precision seeder using response surface methodology. Biosyst. Eng. 97:347-356. DOI: https://doi.org/10.1016/j.biosystemseng.2007.03.013
Zhao J., Zhen C., Zhang J., Hang D., Nian Y., Sun N. 2020. Parameter optimization and experiment of differential filling groove single grain seed metering device for wheat. Trans. Chin. Soc. Agric. Mach. 51:65-74. [In Chinese].
Zhao X., Ran W., Hao J., Bai W., Yang X. 2022. Design and experiment of the double-seed hole seeding precision seed metering device for peanuts. Intl. J. Agric. Biol. Eng. 15:107-114. DOI: https://doi.org/10.25165/j.ijabe.20221503.6608
How to Cite
Chen, X. (2024) “Development of high-speed and precision metering device with gradient-feeding and control seed for soybean planting”, Journal of Agricultural Engineering, 55(3). doi: 10.4081/jae.2024.1574.
Copyright (c) 2024 the Author(s) 
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
PAGEPress has chosen to apply the Creative Commons Attribution NonCommercial 4.0 International License (CC BY-NC 4.0) to all manuscripts to be published.
Similar Articles
- Noureldin Sharaby, Artyom Doroshenko, Andrey Butovchenko, Modelling and verification of sesame seed particles using the discrete element method , Journal of Agricultural Engineering: Vol. 53 No. 2 (2022)
- Yufan He, Qingzhen Zhu, Weiqiang Fu, Changhai Luo, Yue Cong, Wuchang Qin, Zhijun Meng, Liping Chen, Chunjiang Zhao, Guangwei Wu, Design and experiment of a control system for sweet potato seedling-feeding and planting device based on a pre-treatment seedling belt , Journal of Agricultural Engineering: Vol. 53 No. 3 (2022)
- Andrea Peruzzi, Luisa Martelloni, Christian Frasconi, Marco Fontanelli, Michel Pirchio, Michele Raffaelli, Machines for non-chemical intra-row weed control in narrow and wide-row crops: a review , Journal of Agricultural Engineering: Vol. 48 No. 2 (2017)
- Chengcheng Ma, Shujuan Yi, Guixiang Tao, Yifei Li, Hanwu Liu, Theoretical analysis and experiment of seed-picking mechanism of belt high-speed seed-guiding device for corn , Journal of Agricultural Engineering: Vol. 55 No. 1 (2024)
- Yerong Sun, Kechuan Yi, Agricultural machinery photoelectric automatic navigation control system based on back propagation neural network , Journal of Agricultural Engineering: Vol. 54 No. 4 (2023)
- Lingxin Bu, Qianwen Kou, Adilet Sugirbay, Jun Chen, Yu Chen, An air-assisted mechanical hill-seeding device for foxtail millet (Setaria italica) , Journal of Agricultural Engineering: Vol. 55 No. 2 (2024)
- Yanmei Meng, Tingting Zhang, Jin Wei, Jinlai Zhang, Xulei Zhai, Design and experiments of an automatic pipe winding machine , Journal of Agricultural Engineering: Vol. 54 No. 2 (2023)
- Wei Deng, Chunjiang Zhao, Liping Chen, Xiu Wang, Constant pressure control for variable-rate spray using closed-loop proportion integration differentiation regulation , Journal of Agricultural Engineering: Vol. 47 No. 3 (2016)
- Gabriele Mattachini, Elisabetta Riva, Francesca Perazzolo, Ezio Naldi, Giorgio Provolo, Monitoring feeding behaviour of dairy cows using accelerometers , Journal of Agricultural Engineering: Vol. 47 No. 1 (2016)
- Shinar Ospanova, Mubarak Aduov, Sultan Kapov, Alexander Orlyansky, Kadirbek Volodya, The results of experimental research of a rotor seed-metering unit for sowing non-free-flowing seeds , Journal of Agricultural Engineering: Vol. 55 No. 1 (2024)
You may also start an advanced similarity search for this article.
