https://doi.org/10.4081/jae.2024.1586
Evaluation of the effects of different openers mounted on no-tillage planters on maize: a field study
Published: 31 May 2024
Abstract Views: 205
PDF: 117
Publisher's note
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
Authors
The openers are the planter components that interact with soil and several researchers studied openers characteristics and behaviour in different conditions, but few explored the effects on crop emergence, growth and yield. The aim of this study is to evaluate and quantify any effects of openers on crop development and yield. The performance of three planters equipped with five different openers were compared on maize in a field test: double disc (DD), punch planter (PP), horizontal furrow with winged opener (HW), vertical furrow with winged opener (VW), vertical furrow with shank opener (SO). Seed spacing, depth, penetration resistance and plant emergences, root dry mass and yield were measured respectively on seeding slots and during crop development to evaluate openers effects. The results showed low variability in seed depth and spacing when DD and PP openers were used despite higher level of compaction on DD slot. High variability was found on maize plants when VW and HW openers were used. SO obtained relevantly lower yield in absolute value -35% (1.7 Mg ha-1) compared to other openers. However, the high variability observed in the different replicates and plant adaptability to stress conditions could explain the absence of significant differences in crop yield.
Ahmad, F., Weimin, D., Qishou, D., Rehim, A., Jabran, K., 2017. Comparative performance of various disc-type furrow openers in no-till paddy field conditions. Sustain. 9. https://doi.org/10.3390/su9071143
Aikins, K.A., Barr, J.B., Ucgul, M., Jensen, T.A., Antille, D.L., Desbiolles, J.M.A., 2020. No-tillage furrow opener performance: a review of tool geometry, settings and interactions with soil and crop residue. Soil Res. 58, 603–621.
Baker, C.J., Saxton, K.E., 2007. No-tillage seeding in conservation agriculture. Cabi.
Benetti, M., DeRos A., Sozzi, M., Sartori, L.., 2022. Performance of a new punch planter on organic mulch. unpublished.
Blanco-canqui, H., Lal, R., 2021. Soil structure and organic carbon relationships following 10 years of wheat straw management in no-till. Soil Tillage Res. 95, 240–254. https://doi.org/10.1016/j.still.2007.01.004
Botta, G.F., Tolon-Becerra, A., Lastra-Bravo, X., Tourn, M., 2010. Tillage and traffic effects (planters and tractors) on soil compaction and soybean (Glycine max L.) yields in Argentinean pampas. Soil Tillage Res. 110, 167–174. https://doi.org/10.1016/j.still.2010.07.001
Celik, A., Ozturk, I., Way, T.R., 2007. Effects of various planters on emergence and seed distribution uniformity of sunflower. Appl. Eng. Agric. 23, 57–61.
Chaudhuri, D., 2001. Performance Evaluation of Various Types of Furrow Openers on Seed Drills * a Review 79, 125–137. https://doi.org/10.1006/jaer.2000.0688
Choudhary, M.A., Guo Pei Yu, Baker, C.J., 1985. Seed placement effects on seedling establishment in direct-drilled fields. Soil Tillage Res. 6, 79–93. https://doi.org/10.1016/0167-1987(85)90008-X
Dang, Y.P., Dalal, R.C., Menzies, N.W., 2020. No-Till Farming Systems for Sustainable Agriculture: Challenges and Opportunities, No-Till Farming Systems for Sustainable Agriculture. Springer.
Hasimu, A., Chen, Y., 2014. Soil disturbance and draft force of selected seed openers. Soil Tillage Res. 140, 48–54. https://doi.org/10.1016/j.still.2014.02.011
Iqbal, M., Marley, S.J., Erbach, D.C., Kaspar, T.C., 1998. An evaluation of seed furrow smearing. Trans. Am. Soc. Agric. Eng. 41, 1243–1248. https://doi.org/10.13031/2013.17289
ISO/TC 23, 1984. ISO 7256-1: 1984 Sowing equipment - Test methods - Part 1: single seed drills (precision drills).
Kachman, S.D., Smith, J.A., 1995. Alternative measures of accuracy in plant spacing for planters using single seed metering. Trans. ASAE 38, 379–387.
Kassam, A., Friedrich, T., Shaxson, F., Pretty, J., 2009. The spread of conservation agriculture: Justification, sustainability and uptake. Int. J. Agric. Sustain. 7, 292–320. https://doi.org/10.3763/ijas.2009.0477
Knappenberger, T., Köller, K., 2012. Spatial assessment of the correlation of seeding depth with emergence and yield of corn. Precis. Agric. 13, 163–180. https://doi.org/10.1007/s11119-011-9235-4
Kocher, M.F., Coleman, J.M., Smith, J.A., Kachman, S.D., 2011. Corn seed spacing uniformity as affected by seed tube condition. Appl. Eng. Agric. 27, 177–183.
Lal, R., 2013. Food security in a changing climate. Ecohydrol. Hydrobiol. https://doi.org/10.1016/j.ecohyd.2013.03.006
Liu, K., Zanchin, A., Sozzi, M., Gasparini, F., Benetti, M., Sartori, L., 2021. Evaluation of seeding unit equipped with shock absorber suspension on corn and sunflower, in: 2021 IEEE International Workshop on Metrology for Agriculture and Forestry (MetroAgriFor). pp. 114–119. https://doi.org/10.1109/MetroAgriFor52389.2021.9628859
Malasli, M.Z., Celik, A., 2019. Disc angle and tilt angle effects on forces acting on a single-disc type no-till seeder opener. Soil Tillage Res. 194, 104304. https://doi.org/10.1016/j.still.2019.104304
Nunes, M.R., de Lima, R.P., Tormena, C.A., Karlen, D.L., 2021. Corn seedling root growth response to soil physical quality. Agron. J. 113, 3135–3146. https://doi.org/10.1002/agj2.20705
Panning, J.W., Kocher, M.F., Smith, J.A., Kachman, S.D., 2000. Laboratory and field testing of seed spacing uniformity for sugarbeet planters. Appl. Eng. Agric. 16, 7–13.
Ross, F., Di Matteo, J., Cerrudo, A., 2020. Maize prolificacy: A source of reproductive plasticity that contributes to yield stability when plant population varies in drought-prone environments. F. Crop. Res. 247, 107699. https://doi.org/10.1016/j.fcr.2019.107699
Swanepoel, P.A., le Roux, P.J.G., Agenbag, G.A., Strauss, J.A., Maclaren, C., 2019. Seed-drill opener type and crop residue load affect canola establishment, but only residue load affects yield. Agron. J. 111, 1658–1665. https://doi.org/10.2134/agronj2018.10.0695
Tamburini, G., Bommarco, R., Wanger, T.C., Kremen, C., van der Heijden, M.G.A., Liebman, M., Hallin, S., 2020. Agricultural diversification promotes multiple ecosystem services without compromising yield. Sci. Adv. 6. https://doi.org/10.1126/SCIADV.ABA1715
Tokatlidis, I.S., Koutroubas, S.D., 2004. A review of maize hybrids’ dependence on high plant populations and its implications for crop yield stability. F. Crop. Res. 88, 103–114. https://doi.org/10.1016/j.fcr.2003.11.013
Trentin, R.G., Modolo, A.J., Vargas, T. de O., Campos, J.R. da R., Adami, P.F., Baesso, M.M., 2018. Produtividade de soja em Latossolo compactado em função de mecanismos sulcadores. Acta Sci. - Agron. 40, 1–9. https://doi.org/10.4025/actasciagron.v40i1.35015
Vamerali, T., Bertocco, M., Sartori, L., 2006. Effects of a new wide-sweep opener for no-till planter on seed zone properties and root establishment in maize (Zea mays, L.): A comparison with double-disk opener. Soil Tillage Res. 89, 196–209. https://doi.org/10.1016/j.still.2005.07.011
How to Cite
Benetti, M. (2024) “Evaluation of the effects of different openers mounted on no-tillage planters on maize: a field study”, Journal of Agricultural Engineering, 55(3). doi: 10.4081/jae.2024.1586.
Copyright (c) 2024 the Author(s)
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
PAGEPress has chosen to apply the Creative Commons Attribution NonCommercial 4.0 International License (CC BY-NC 4.0) to all manuscripts to be published.
Similar Articles
- Kishor P. Kolhe, Demelash G. Lemi, Siraj K. Busse, Studies of tractor maintenance and replacement strategies of Wonji Shoa Factory, Ethiopia , Journal of Agricultural Engineering: Vol. 55 No. 1 (2024)
- Piernicola Masella, Lorenzo Guerrini, Alessandro Parenti, Fabio Baldi, Paolo Spugnoli, Performance of a driven hitch-cart for draft animal power under different power take-off torque and ballast levels condition , Journal of Agricultural Engineering: Vol. 47 No. 4 (2016)
- Shinar Ospanova, Mubarak Aduov, Sultan Kapov, Alexander Orlyansky, Kadirbek Volodya, The results of experimental research of a rotor seed-metering unit for sowing non-free-flowing seeds , Journal of Agricultural Engineering: Vol. 55 No. 1 (2024)
- José Roberto Moreira Ribeiro Gonçalves, Gabriel Araújo e Silva Ferraz, Étore Francisco Reynaldo, Diego Bedin Marin, Patrícia Ferreira Ponciano Ferraz, Manuel Pérez-Ruiz, Giuseppe Rossi, Marco Vieri, Daniele Sarri, Comparative analysis of soil-sampling methods used in precision agriculture , Journal of Agricultural Engineering: Vol. 52 No. 1 (2021)
- Caiqi Liao, Jin Chen, Fanzhao Geng, Xueming Tang, Airflow basin structure numerical optimisation analysis and suction nozzle characteristics experimental study of vacuum-vibration tray precision seeder , Journal of Agricultural Engineering: Vol. 53 No. 4 (2022)
- Danilo Monarca, Massimo Cecchini, Andrea Colantoni, Simone Di Giacinto, Giuseppina Menghini, Leonardo Longo, Study on the possibility of application of a compact roll over protective structure for agricultural wheeled narrow track tractors , Journal of Agricultural Engineering: Vol. 44 No. s2 (2013): Proceedings of the 10th Conference of the Italian Society of Agricultural Engineering
- Longlong Wang, Changjiang Zheng, Mingke Li, Tongtong Mi, Songze Li, Xuemei Yi, Drag reduction design and experiments for the chisel-shaped shovel tip , Journal of Agricultural Engineering: Vol. 55 No. 3 (2024)
- Fabrizio Sarghini, Prospero Di Pierro, Antonio Veneruso, Paolo Masi, Scale-up analysis and critical issues of an experimental pilot plant for edible film production using agricultural waste processing , Journal of Agricultural Engineering: Vol. 43 No. 4 (2012)
- Luigi Cavazza, Adriano Guarieri, Antonia Patruno, Elio Cirillo, Claudio Caprara, EVALUATION OF CRUSTING APTITUDE ON SIEVED SOILS. ANEWAPPARATUS , Journal of Agricultural Engineering: Vol. 39 No. 1 (2008)
- Ren Hiraoka, Yuya Aoyagi, Kazuki Kobayashi, Automatic travelling of agricultural support robot for a fruit farm. Verification of effectiveness of real-time kinematic-global navigation satellite system and developed a simulator for specification design , Journal of Agricultural Engineering: Vol. 54 No. 1 (2023)
<< < 3 4 5 6 7 8 9 10 11 12 > >>
You may also start an advanced similarity search for this article.
