See how this article has been cited at scite.ai
scite shows how a scientific paper has been cited by providing the context of the citation, a classification describing whether it supports, mentions, or contrasts the cited claim, and a label indicating in which section the citation was made.
Evaluating the hydraulic performance of rotating spray plate sprinklers
The current study was design to evaluate the performance of rotating spray plate sprinklers, R3000 with three nozzle sizes i.e., #16-N1, #24-N2 and #32-N3 corresponding to 3.18, 4.76 and 6.35 mm diameters, respectively using various combinations of operating pressure, OP (P1:100 kPa; P2:150 kPa; P3:200 kPa; P4:250 kPa), sprinkler spacing (4-8 m) and sprinkler mounting height, SMH (H1:100 cm; H2:150 cm). The performance of sprinkler nozzles regarding water distribution pattern was examined using wetted radius, Christiansen's uniformity coefficient (CU) and distribution uniformity (DU). The data collection regarding water distribution from selected nozzles was performed using catch cans, placed at 1 m2 grids. The results revealed that the wetted radius of all selected nozzles increased by increasing the OP and SMH and the maximum values of the wetted radius of N1, N2 and N3 were 7.12, 8.26 and 8.68 m, respectively, under P4 and H2. Moreover, the combined effect of P4 and H2 produced the highest values of CU and DU for each nozzle i.e., CU:86.95%; DU:82.05% for N1 at 6 m spacing, CU:89.21%; DU:83.20% for N2 at 7 m spacing, and CU:86.44%; DU:80.36% for N3 at 7 m spacing. It was found that the wetted radius, CU and DU of R3000 sprinklers for selected nozzles increased by increasing the OP and SMH within the selected range of pressures and heights.
Supporting Agencies
National Natural Science Foundation of China, Key R&D plan project of Jiangsu Province, Faculty of Agricultural Equipment of Jiangsu UniversityHow to Cite

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
PAGEPress has chosen to apply the Creative Commons Attribution NonCommercial 4.0 International License (CC BY-NC 4.0) to all manuscripts to be published.